Hopefully, that explained everything you wanted to know about what you can do if you lose an M.2 screw! Now, sometimes, we just have to wing it and find a way to make it work. You’re missing that M.2 screw but you still want to finish setting up your PC now, and not in 3 days when the new screw arrives, right?

If you just want to make sure the drive stays where you put it and want something that’s lowkey. This is an option. So there’s a non-zero chance that there might be a screw that could fit an M.2 standoff in your collection. As the name implies, they’re screws designated to screw in M.2 drives into your motherboard. And they can be a right nuisance at times because they have a tendency to magically disappear when you actually need them. M.2 Drives don’t really need to be screwed down flat onto the motherboard, they temporarily (!) work perfectly fine just hovering at an angle of 30°.M3X3 screw(most computers include these. These secure the Y1WJX M.2 drive carrier, or a 2.5" drive into 745TM) These are some tips to make it work (temporarily), but I don’t recommend doing them if at all possible, and if you do, make sure that you don’t just leave it like that. Each screw size is described using two numbers – the ‘M’ number and a number indicating the length of the shank, in mm, so M2 screw dimensions of M2 x8, are 8mm long, measured under the screw head.

Not all games are necessarily playable with the exact same performance provided by the PS5 console’s internal Ultra-High Speed SSD, even where the M.2 SSD device’s sequential read speed is faster than 5500MB/s. M.2 screws, a relatively new addition to the menagerie of things that you have to screw into your motherboard. Some motherboards don’t have standoffs. Some do, and you need to install them. Some come with them pre-installed. And so on. If you’re handy at all in any way, you most likely have an assortment of screws you’ve collected over the years. M2 screws are available in a wide range of materials including steel, stainless steel, brass, nylon, aluminium and titanium as well as exotic materials including Duplex, Super Duplex and Inconel.

M.2 storage devices are classified numerically based on performance. The higher the Class, the faster the overall performance: The original SATA protocol was designed to maximize the performance of platter (physical spinning) hard drives. With the proliferation of SSD drives, the SATA storage management protocol has become a limiting factor. The NVMe (Non-Volatile Memory) protocol has been designed for solid state drives and uses the PCIe bus for optimal performance. An M.2 drive may support SATA or PCIe/NVMe but not both. Depending on the drive, and what the computer can support, not all M.2 drives work in all computers. So if you want to buy some screws for M.2 standoffs, what you need are M2 screws. Specifically, you want to get the following M.2 screw size: “ M2x3mm“. MacGyver it (Not Recommended) No. If your M.2 SSD has a built-in heatsink, we recommend against adding any additional heatsinks. Doing so may reduce the effectiveness of the built-in heatsinks.

Get some actual M.2 screws and do it right. But in the meantime… Look for Old Small Screws in Your Home Screwing it in is just a precaution to make sure that the drive doesn’t get dislodged if you accidentally bump into your PC or something.

4 Comments

It’ll hold your drive down just fine, to the point where you don’t even need to bother with the M.2 screws when you do find them. Though the drives might come loose If you move your PC around a lot. Skip the M.2 Screw entirely Is it possible to store a part of game data on console storage and the remaining data on M.2 SSD storage?