When the project is finished it is the most natural and beautiful option available. However, you must complete the process for each individual board which can take several hours or even days to complete. If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings. Veneer cap is not readily available. Requiring a high level of skill and tools to create your own. The veneer can be cut from offcuts put the additional labour for each piece is high. There are two ways of replacing fascia.One can offer a cheaper fix, the other a long-term solution. Here’s the difference. Capping over fascia

Fascia Capping Boards | Eurocell Fascia Capping Boards | Eurocell

Fascia capping uses a thin aluminum sheathing that doesn’t always look structurally sound. If the fascia boards are really wide the capping can have a wavy look to it. The aluminum does not appear to be solid or have the integrity of a regular fascia board. Even when painted, cut ends look unfinished. The colour may help them blend in, but it’s still a cut end. Glued on cap veneerOther than expanding and contracting, aluminum is quite resilient against the elements. If the aluminum is nailed correctly to a solid fascia board, it can last virtually forever. If the seams are not exposed to water getting behind them and the roof is in good health, fascia capping can be great. If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed. Testing Like the plastic end caps, though, unless you take the extra time (and cost) to seal all edges, this solution is not water tight and moisture can get to the plank cores. Our capping boards come in two enduring styles in eight different colours and eight widths ranging from 150mm to 450mm.

Things to Know When Considering Fascia Capping 11 Things to Know When Considering Fascia Capping

The plastic also allows the end caps to flex and swell as needed to maintain their positioning in the ends of the planks. Installation is easy, too. You just line the end cap up with the board, tap it with a mallet and it fits inside the end of the board with a snug fit. There are two distinct disadvantages of raising the fascia board. First is grime and water, the other the stairs. Fascia capping is ideal for preventing water from penetrating through the wood. It doesn’t have to be painted and it can be put right on top of the fascia boards. However, here are a few ways water can get behind the capping. Not being attached like some other finishing options, there is no conflict between material and movement.Aluminum painted surfaces usually last around 10-15 years from looking superior. After about 10 years the aluminum will begin to oxidize. When this happens the fascia capping doesn’t look as appealing. Sometimes you can repaint the surface and make it look better but it won’t return to how it looked when it was put up. Installing a fascia is a way to connect and cover the board end openings. As the name suggests, the board is a facing board that covers imperfections and makes a single, smooth appearance.