CMT Ø3mm x 12mm Cut Length Shank=3mm Carbide Up-cut Finishing Spiral CNC Router Cutter CMT Part Code - 191.

For use on Soft and Flexible Materials including MDF, Hardwood, Softwood, Laminate Board, Plywood Particle Board and other Sheeting.Downward Spiral Plunge cutting for elimination of burrs on the work surface by pushing the chips downwards. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts.A high feed rate router cutter for cutting solid timbers, chipboard, MDF and other man-made materials. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.

Capable of feed rates from 5 to 10m/min (governed by timber + machine + extraction + item stability). The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. As a general rule of thumb for cutting wood, it’s best to never cut deeper than the diameter of the bit.Choose cutters with the shortest flute length that is suitable for the job with as little overhang as possible. Use lower feed rate when depth of cut increases, if possible use suitable work holding to reduce lifting of the work piece. This site uses data saved in the cookie files and other technologies to help with navigation and give you an opportunity to provide feedback, analyse your use of our products and services. These veining router bits are used to produce very thin straight or curved cuts in the surface of material, with a rounded bottom groove like a vein, commonly used for sign making or routing small grooves and decorative line work. This tool is a Z=2 (2 Flute) Positive/R (positive chip flow extracting the waste upwards towards the extraction hoods) and is capable of feed rates from 5 to 10m/min (governed by timber + machine + extraction + item stability).