This is typically used for the Elgato Game Capture HD60 Pro or Elgato Game Capture 4K60 Pro to synchronize audio from the Chat Link adapter connected to another port on your system to the capture device. This is generally not needed to be changed for the Elgato Game Capture HD60 Sas it has its own alternative audio input. Cold booting the PC means flushing the PC of all power, and then turning it on. This resets internal components.

Elgato HD60 S, usb3.0 External Capture Card, Stream and

In rare cases, a firmware update can actually harm the Elgatohardware. This is why it should always be done under the supervision of Elgato Support, under very specific circumstances. The vast majority of TV sets and Displays will not need to be adjusted in this way, but if yours does, the "correct" number on the slider will vary, depending on what TV or Display you're using. Close OBS Studio and open our 4K Capture Utility software to see if a signal comes through. If no signal is appearing, you will need to do some general troubleshooting. To move an object around in your scene, you can hover over it in the preview or select it in your Sources list. Then drag it around in the preview. ScaleThe Attenuation slider lets you set how much to Automatically reduce game sound when you are speaking. In this guide we’ll show you how to use your ElgatoGame Capture HD60 S+ with OBS Studio and configure the software to get the most out of your device for recording or streaming. While this guide is written for OBS Studio, many of the steps are the same for Streamlabs OBS. Macs with only an Intel integrated GPU are not supported as most of them won't be able to process hardware video encoding and video compositing at the same time (a dedicated GPU is required for video compositing in most cases).

Elgato Game Capture HD60 S Manual and User’s Guide

The gaming experience is all about sharing. Stream and record your Xbox, PlayStation or Wii U gameplay and share your journey with friends, fans and generations to come. If you didn’t wish for your Elgato Game Capture HD60 S to take up the whole screen, you can grab one corner and drag in towards the center to make it smaller.When using Cam Link 4Kor Game Capture HD60 S+in OBS Studio on macOS, the audio capture needs to be set manually. Audio is not captured from capture devices automatically like in OBS Studio for Windows.

Capture – Elgato Capture – Elgato

A processor with a suffix like "U" (Ultra-low voltage) or "M" is not recommended, since it will have significantly lower performance. For example, i7-4510U might seem to be powerful, but the U suffix indicates that it has much lower performance than other i7 processors. All Elgato Capture Devicescapture sound in the Stereo (2.0) format. The sound format must be PCM. Other sound formats, such as bitstream, Dolby Digital 5.1, DTS, Dolby Atmos, and others are not supported. This article gives a general summary of all aspects of the Elgato Game Capture HD 3.6 software interface.The game sound is reduced by the amount set in Attenuationif the microphone sound reaches the level set in Threshold. Make sure the source you are trying to capture is turned on and outputting a signal. Connect the source or console directly to a monitor or TV to verify a video image is appearing. In some cases, you may need to lower some settings if you want to use Elgato Game Capture HD60 S+ with a computer that doesn't have a supported graphics card. Unplug the headphones from the controller and the PlayStation 4 will output sound to the capture card.

HD60S having a black screen - Reddit An issue with Elgato HD60S having a black screen - Reddit

This wizard will setup OBS Studio based on various details about your computer, such as monitor resolution, performance of your system, and internet speed. It’s a good option for getting started. To solve this issue, A tool called Elgato Sound Captureis available. Elgato Sound Capturewill capture and split the PCs audio out over the HDMI output of the PC, and to a second output such as headphones. This guide will walk you through steps to take if your capture card has a source plugged in but it not detecting the signal correctly and is displaying No Signal or there is no video on the pass-through TV or monitor. These steps can also be used if the video signal is not appearing as expected. If you would like more information about the Elgato Game Capture HD software interface, then see this detailed article: Both Game Capture HDand 4K Capture Utilitysoftware support analog audio capture from specific capture devices. The analog audio level can be changed in the software settings.

Video looks lower quality

The Configure Videofunction with the Elgato Game Capture HD60 S is used for viewing the signal information the card is receiving. This is handy if you're trouble shooting the signal type that is coming from your PC, Console, or other source. File Export Location - This is where any files you Share/Export will be stored. The default location is in your Videos folder. To use the basic functionality with Elgato Game Capture HD60 S+, including video capture and editing, your total amount of installed RAM needs to be 4GB or higher. The Nintendo Switch lets users change the audio settings regardless of what the capture/display device is capable of. If the Nintendo Switch is set to Surround mode, some sounds will not be captured correctly by Elgato Game Capture devices. There are many instructive articles that cover these features, which can be found in a searchable database: