Chamfering is an important part of the pipe installation process. The chamfer tool reduces the outside angle of the pipe wall and, assuming all sharp edges have been removed, will provide a more leak-free connection between the pipe and the fitting. REED carries a wide variety of high-quality tools for plastic pipe including tubing cutters, shears, saws, pipe cutters, reamers and much more. REED tools hold the industry standard for cutting through various plastics such as PE, PEX, ABS and PVC. With 125+ years’ experience, it is no surprise that REED plastic pipe tools are highly recommended by utility companies, mechanical contractors and underground contractors throughout the industry. Since 1896 REED has always strived to invent tools that become industry standard. An absolute must-have tool for anyone in construction industry, who has had to face the problems of chamfering and joining plastic pipes. The Pipe Chamfer Tool is fully patented, and designed by the trade, for the trade, to offer an easy and hassle free solution to square and chamfer 110mm plastic pipes to 15° in just one simple operation! Produces smooth, consistent chamfer on plastic pipe, eliminating leaky glue joints that can be caused by improper chamfer.

Do not force the tool. The replaceable HSS cutting blades will produce a square and chamfered pipe to 15°, which conforms with EU regulations. Making sure the Pipe Chamfer Tool is held parallel to the pipe, use the drill to rotate and begin to apply steady, even pressure. Do not force the tool. The replaceable HSS cutting blades will produce a square and chamfered pipe to 15°, which conforms with EU regulations. Unfortunately there are a few areas where next working day delivery isn't possible because of their remote location. However we always try to delivery to these areas within 2 working days. In certain circumstances items can sometimes take more than 7 days due to limited courier availability and weather conditions in these areas.