Fiat Multiecuscan 4.6 Full software 2020 multilanguage Free downlead torrent link Multiecuscan Release Year / Date: 2020 Version: 4.6R1 Support for Magneti Marelli IAW 4AF/4EF GAS Injection (Multipla Bipower, Doblo Bipower) (Full support) Support for PROXI deactivation/activation of Hazzard lights on hard braking function (Grande Punto, Evo, 500, Mito, Giulietta) Support for Magneti Marelli IAW 5SF8 Natural Power Injection (Fiorino, Grande Punto, Punto Evo, Qubo) (Full support) Added Transfer License function that allows users to unregister the program from one computer and register it on another one

A Windows Mobile (versions 5, 6.0, 6.1, 6.5) or Windows CE device with Bluetooth support. Could be a cell phone, PDA or GPS device. Yellow Adaptor Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12 Added PROXI Alignment Procedure for Grande Punto, Punto Evo, 500 and Mito (still in experimental mode)

Support for Magneti Marelli IAW 5SF8 CF5/EOBD Injection (500/Grande Punto/Punto Evo 1.2 8V/1.4 8V) (Info and DTC only) Added possibility to manually enter service info (Date of last service, days till next service, distance till next service, etc.) Added possibility to change Sevice Distance (on almost all vehicles) and Service Period (on some vehicles) in Service Interval Reset modules Extract the files from this archive (blank.bin, boot_v17.bin, config.bin, esp_init.bin, user1.bin) and copy them into UPDATE\WIFI\ folder on the CANtieCAR flash drive Released FES mobile 2.0 with full support for same cars/modules/functions as FiatECUScan (except Adjustments)

The STN1110 is Firmware updateable while the ELM327 requires the chip to be replaced with each new version Fixed a bug with execution of procedures in many modules for Grande Punto, Punto Evo, 500, Mito, Giulietta, Panda 2012, Ducato 250 Fl Added "parameter filter" functionality - In Parameter's screen you can hold SHIFT key and type text to filter parameters by name. For example press SHIFT and type "temperature" and all parameters with word "temperature" will be displayed on top. For Windows 8.1, 10 & 11, Microsoft .NET Framework 3.5 or higher is required. This may not be installed by default. Support for Magneti Marelli IAW 5SF8/SDU CF5/EOBD LPG Injection (Grande Punto, Punto Evo, 500, Ypsilon 2011)We cannot take any responsibility for incorrect operation of non-geniune software and the problems it may cause to your computer and vehicle. The file is a CAB installer. It will install the program and all required files on your Windows Mobile/Windows CE device. IMPORTANT NOTE: These adaptor cables are only intended for use with the MultiECUScan software, on supported Fiat

Magneti Marelli IAW 5SF CF4/EOBD Injection (1.4 8V) (Outside EU) |INFO|DTC|DTC EX|PRM|ACT|ADJ| KL ELM Added support for FIAT SEDICI, FIAT UNO 2010, LANCIA YPSILON 2011, FIAT 500 0.9 TWIN AIR TURBO, FIAT LINEA 1.6 16V and 1.8 16V Support for Magneti Marelli IAW 5SF CF4/EOBD Injection (Stilo, Palio, Linea, Doblo, Ypsilon, Musa) (Full support) The STN1110 chip supports the full ELM327 command set and an extended command set adding many enhanced features

Alternative software

Magneti Marelli IAW 5SF CF6/EOBD Natural Power Injection (3.0 CNG) |INFO|DTC|DTC EX|PRM|ACT|ADJ| ELM Disconnect the CANtieCAR interface from USB port and then connect it again. It will begin the update of firmware.

Disable logging in the WiFi firmware. The WiFi firmware is still in testing/incomplete phase and needs this additional step to make it work correct.

Multiecuscan works on Windows XP SP2, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 and Windows 11!