The next step is to remove the motherboard. Begin by removing the one screw that secures it in place. Once the screw is removed, disconnect the antenna cable from the motherboard. It is important to remove the antenna cable because without removing the cable, you won’t be able to remove the motherboard entirely from the phone’s body. Make sure to apply heat on the side of the battery to loosen the glue which holds the battery together to the main body of the phone. Ensure you don’t apply much heat to the battery as it is not recommended. Whether you have screen issues, software issues, camera problems, or any other problem, you have to find a way to repair it. At this point in time, you have the following options: Replacement Parts and of highest quality supplied by OEM and are guaranteed to completely fit and work.

Now the moment you have been waiting for! Once you have completed all the steps, you will be left out with the screen frame you will replace. You can find the screen frame from the market or online shops. There are brand new screen frames, and there are used ones. We recommend using a brand new screen frame so you can enjoy your Samsung A12 just like a new one. Conclusion The prices shown are our recommended repair prices for out of warranty screen replacement. This is a representative example of a reasonable repair cost for an out of warranty screen repair at any of our Authorised Service Centres. The price may change should any additional work be required to your device and you may be able to find a cheaper price by shopping around.

If you are the owner of a Samsung A12 and have encountered a broken screen, then don’t worry – you’re not alone. Screen replacement is a common issue with smartphones, and it’s usually a pretty easy fix. In this comprehensive guide, we will walk you through the entire process of replacing your Samsung A12 screen. We’ll cover everything from preparing for the repair to completing the actual replacement. So if you’re ready to get started, keep reading! Once you have successfully removed the vibrator cable, put it aside so you can focus on the rest of the guide. The earpiece is located just above the front-facing camera. Using your spudger, gently pry up on the earpiece and remove it from the phone. It is a very straightforward process, so that it won’t take time. Make sure you apply minimum heat to the earpiece to loosen the glue. This way, you will eliminate any chance of damaging the earpiece. Next, use your spudger to pry up on the battery connector gently. Be careful not to damage the connector as you do not want to have to replace the entire motherboard. When it comes to the new generation of smartphones, it is quite clear that the screens are very vulnerable. The Galaxy A12 has a large 6.5-inch display with a lot of great features, but still, it is very fragile.

We are a leading company in the UK who only specialise in repairing phone screens and nothing more! So when it comes to repairing your device simply put there isn’t anyone more qualified. Like so many others we specialise in the installation of genuine Samsung parts. The vibrator motor is located beneath the earpiece. Before you start removing the motor, make sure to apply heat so you can loosen up the glue. You can also use a heating pad for each step that requires minimal heat. A heating gun is the easiest and most convenient option. Please be aware that if there is damage to your product, this may mean that under the terms of the Samsung manufacturer's warranty, you are no longer entitled to a free repair, and any repair costs will be chargeable. In addition, there may be an inspection fee, payable directly to the Authorised Service Partner, required for inspection of the device. If your product is deemed to be out of warranty, our Authorised Service Partner will not proceed with any repair until they have shared the cost estimate with you and you authorise them to proceed.The next step is to remove the flex button. It is a delicate process, and you will need to use a spudger or a plastic opening tool. Be very careful not to damage the button flex as it is easily damaged. The next step is to remove the speaker cover. It is a small, circular piece of metal located at the bottom of the phone. To remove it, use a small Phillips head screwdriver to unscrew seven screws that hold it in place. Once the screws are removed, you can gently pry off the speaker cover with a plastic opening tool. Be careful not to damage the speaker underneath. Once the frame is removed, locate the small silver connector that connects the display to the logic board. This connector is located just above the power button on the logic board. If your product is deemed to be out of warranty on engineer inspection the repair and a convenience surcharge will be chargeable.