Our entire bike frame protection range is manufactured in our own facility here in Sheffield, UK. HKT Protect ™ utilises a carefully selected material that balances protection, malleability and a quality that will last the life of your bike. Our bike frame protection kits are universal and designed to fit everything from a steel hardtail through to the latest ebikes and downhill rigs. This kit contains 16 pieces; 1x top tube protector, 1x down tube protector 1x down tube extension 2x chain stay protectors, 2x seatstay protectors, 6x extension pieces and 3x cable rub protectors. Looking for precise application of your protection kit? Simply add one of our HKT Protect ™ application tools.

XL / Minimum coverage, maximum impact. The XL frame protection kit is perfect for adding just enough protection to your bike. Aftermarket options are usually an adhesive plastic film applied to the surface of the frame. These films or “vinyls” are made from either Polyvinyl Chloride (PVC) or Polyurethane. How do I protect my MTB frame?A: No, these kits are a good investment for aluminum and steel frames as well. They can protect paint and prevent scuffs that could severely damage the frame.

It can be supplied on a roll in a wide variety of sizes and is affordable. It is offered in both matt and gloss finishes to match your frame’s paint. Installation requires the use of a spray solution to slide into the desired position and then applying pressure with a squeegee before using a heat gun to slowly warm and ensure adhesion. You can add protection to as much or as little of your frame as you want and it can be used to affordably protect every bike in your quiver. MTB frame protection: everything you need to know What is mountain bike frame protection?

YOUR SCICON ACCOUNT

A: A full-frame protection kit like those from RideWrap and invisiFRAME can take several hours to install. Protective kits that just shield the downtube or portions of the frame can be installed in less than 30 minutes. This kit contains 18 pieces; 1x down tube protector 1x down tube extension 2x chain stay protectors, 2x seatstay protectors, 6x extension pieces, 3x cable rub protectors and 2x clear fork protectors. A: It's easier to wrap a frame that doesn't have parts on it, but you can wrap a complete bike as well. If using a full-frame kit, we recommend removing the wheels to make it easier to work around the frame. A: Prior to installing any protective kit, you should wash your bike to remove any dirt or debris. Let the frame dry and wipe the frame down a lint-free cloth. Some manufacturers also suggest cleaning the frame with isopropyl alcohol right before installation to remove any oils that could prevent the kit from adhering to the frame.