lighter in the hand than a combi. The Monument combi weighs more than 4kg; the XV weighs 1.5kg; the XXII weighs 2.3kg To get over this, aluminium formers (6) are placed between the hook (1) and the pipe and also between the stay (3) and the pipe. better sight lines– as the bend is in the same plane as the Arms of the bender it is easier to line up by eye Degree - Most pipe benders bend to a 90 degree angle, however some bend to 180 degrees and beyond for specialist jobs. Consider the bending degree required for your jobs when choosing a pipe bender.

Monument Tools Lever Copper Pipe Bender 15mm - Screwfix

Dual pipe bender - Dual pipe benders are the most common type of bender and are available in a wide range of shapes and sizes. When the levers are pulled fully, they provide a 90 degree bend. The 15mm 22mm pipe bender or tube bender is an essential part of the toolkit for any heating or plumbing engineer. And let’s face it, two separate guides just mean you have two more things to lose, and two more things you’ve got to find in your van every morning. When Monument look to design, manufacture and market a new product we look to create products which will save the engineer time. In this particular instance, we have designed a smaller and lighter weight pipe bender than the standard combination 15and 22mm hand bender. Buy the Monument Bender Single Sized – 1215K-XV 1315- XVE (1315Longarm-XVL) 1222G-XXII 1322Extended-XXIIELet’s be honest. There’s a tonne of rubbish on the market right now. Where there’s a top brand offering premium products, there’s a “copy” flogging absolute junk for half the price.

Pipe-benders - Gumtree Pipe-benders - Gumtree

The Monument Masters 1215K-XV, 1315-XVE, 1315Longarm-XVL , 1222G-XXII and 1322Extended-XXIIE create similar bend radiuses to a Monument 2600K combi bender; in fact the 1222G has a slightly tighter radius that the 2600K combi bender, as this radius is tighter it creates a slightly different profile on the outside of the bend when compared to a combi. throating occurs on testing with the XV, XVE (XVL) XXII, XXIIE as well as Monument 2600K and a Hilmor® GLM Mark the pipe where you want start of the bend. Position the pipe in the Former under the Retaining Hook. Position the start of bend vertically in line with the Pivot Pin. Free standing pipe bender - Free standing pipe benders are the biggest, most robust type of bender for heavy duty applications. They stand upright on their own stand, giving users the ability to use both hands - providing the strength required to bend heavy pipes. Pipe benders are used when piping needs to bend to fit around an obstacle, or through a gap. Bespoke automakers often use them to bend exhaust pipes and other automotive accessories into shape.better sight lines – as the bend is in the same plane as the Arms of the bender it is easier to line up by eye If you’re working with microbore, unfortunately, there isn’t a set from Hilmore currently available in the UK.

JG Speedfit Cold Forming Bend 15mm | Toolstation JG Speedfit Cold Forming Bend 15mm | Toolstation

We believe the 1215K-XV, the 1315XVE, the 1315Longarm-XVL, the 1222G-XXII and the 1322Extended-XXIIE are easier to use than a combi bender: The copper pipe is then placed under the hook across the top of the wheel former (5) and under the stay. The price differential between Hilmor compared with Stanley and Rothenberger is just too small, and Hilmor offer so much more in terms of quality.throating occurs on testing with the XV, XVE (XVL) XXII, XXIIE as well as Monument 2600K and a Hilmor® GLM