It forms a protective barrier on the surface of the deck, preventing water penetration and minimizing the risk of rot, warping, or cracking. Once you’re finished, leave the oil to dry out completely for around 24 hours, then repeat the process as necessary (two or three coats are generally required for the best results). It’s been battered by seasonal showers, coated in falling autumn leaves, frozen by the winter winds and scorched by the summer sun.

The solution soaks right into the pores of the wood and revives its colour and replaces the natural oils that have been lost. The scrub brush is used for scrubbing the deck with a cleaning product while the pressure washer is used for washing the cleaning product off the deck. Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description. Fit's any of our extension poles shown on the right hand side of the page, or broom handle with a screw-fit adaptor, but not Purdy poles. Osmo Decking Brush Set - Decking oil applicator Floor brush with handle, 150mm for applying Osmo Decking-Oil to the top of deck boards.With your gloves on, shake the solution, pour it out into a suitable container, then stir it up using a paint brush. The Osmo Floor Brush can be attached to the Osmo Telescopic Handle (sold separately) for ease of use. Using a decking stain will cover the natural grain of the timber and so is not suitable if you want to show off the wood. One of the primary purposes of decking oil is to protect the wood from moisture, UV radiation, and other weathering elements. Keep your arm at the same distance from the decking as you cover the decking (around 20 to 25cm) for a consistent finish.

An hour after the second coating has gone on, test out a patch by scrubbing it thoroughly with a scrubbing brush – make sure that the stain has been removed completely. Our aim is to provide you with the products to meet all your decorating needs, with the support and service you need to get the job done. Perfect for using in conjunction with Osmo Decking Cleaner on wooden decking, Osmo Polymer Composite Cleaner on composite decking and Osmo Wood Reviver Gel.Manns 147 Natural Decking Brush is perfect for the application of Decking Oil, Decking Stain, Decking Preservers, and other solvent-based, low viscosity products.

Simply dip your Osmo Floor Brush into the oil or other product you are using, being careful not to overfill it, then brush evenly along the wood grain. Stain pad applicators are suitable for any kind of decking treatment, including oils, stains and paints. Decking stain pads are dipped in the treatment and coated onto the decking, and are replaceable, making the applicators perfect for multiple uses.In this how-to guide we'll show you how to properly prepare your decking before oiling it, and then the best process, product and technique to use to oil your decking.