DRYSEAL PENETRATING DAMP WATERPROOF TREATMENT CREAM 3L

Product Information

Alternatively, it can be that some areas of your wall are more exposed or more susceptible to letting water in, despite being sound and this can also cause damp patches or a uniformly damp area to form. A waterproofer is usually only used as a solution for sound external walls that are exposed to enough rainfall that they just become damp. A second application can be carried out at any time but is usually not necessary. Resistance to rain is normally achieved within one hour of application.

If you want to be sure that your salts and mould won’t return, you can apply a waterproof render or fit a mesh membrane to your wall before replastering. This is a problem because they can act as a bridge for damp that has accumulated in an external wall to travel across the cavity to the internal wall, again creating a damp or cold patch. There may be some occasions when it is more efficient or cost effective to have the materials shipped direct from our suppliers to the customer. Once applied, it absorbs into and bonds with walls, making them waterproof without changing their appearance.Dryseal waterproofer is one of the best ways to keep your masonry waterproof The Consequences of External Damp Dependent on the substrate, type and degree of soiling, we recommend the use of one of our Masonry Fungicide Products or our Moss & Algae Cleaner. When cleaning, make sure that the masonry is damaged as little as possible. Stormdry Cream goes on white then dries clear, allowing you to easily see where you’ve already applied for consistent coverage. Please note that given the current circumstances alot of carrier companies are struggling to keep up with demand and although we do book these deliveries as next day services, the carriers cannot always fulfil these and an extra day may be required.

Dependent on the substrate, type and degree of soiling, we recommend the use of one of our Masonry Fungicide Productsor Green Gone Path & Patio Cleaner. When cleaning, make sure that the masonry is damaged as little as possible. Before a water repellent impregnation is carried out, crusts of dirt and pollutants as well as efflorescence, algae and moss must be removed by a suitable cleaning procedure. Cleaning opens the pores and capillaries, allowing them to absorb the impregnation agent. As opposed to conventional liquid products, Dryseal can be applied in just one working operation to achieve the desired loadings for maximum effectiveness.

Checking Your Wall for Faults

The masonry will generally be resistant to light rain after 2 – 4 hours. As Stormdry Cream is formulated to penetrate deeply This effect should not be confused with the "beading" effect often associated with water repellents. This still applies for deliveries out of our local area but please note that we use independent carriers so be aware that there may be external factors which we cannot control (e.g Far out postcodes or local traffic situations) Materials delivered direct from the manufacturer.

With its unique thixotropic consistency and excellent water repellent properties on a range of building materials, Dryseal Masonry Waterproofing Cream stands out.The damp patches can also be ‘cold spots’ on your wall, as damp patches lose heat 3 times faster than the surrounding wall. Treat your internal walls with anti-mould cleaner and salt neutraliser before redecorating to prevent the reappearance of salt deposits and mould Stormdry Cream appears white immediately after treatment, making it easy to tell which areas have been treated. After 15 – 20 minutes from application the cream starts to penetrate into the masonry and the whiteness will fade over time. After 24 – 48 hours the wall will have returned to its original appearance, there may be some slight darkening which will fade over time. In this case, once you have fixed the issue, you can apply waterproofer as a preventative measure against future damage. However, where sprayed, items such as windows and surfaces which are (or will be) varnished or painted, as well as plants, should be covered with Polythene Sheets. Our Glass Protection Film is ideal use on windows.

If your plaster is sound, once the walls have dried out you should be able to treat them with a salt neutraliser or an anti-mould cleaner to get rid of any salt deposits or mould spots before redecorating.

Signature required on delivery.

A one-coat application, Water Repellent / Waterproofing Cream used for the treatment of Penetrating Damp in external masonry surfaces. Full cure up to two weeks depending on climactic conditions. Tools and equipment must be clean and dry prior to use but can be kept wrapped in plastic during short breaks in use. Adjoining Surfaces: Due to the thixotropic nature of this product, where it is applied by brush or roller, accidental contamination of non-target surfaces can usually be avoided by taking reasonable care. When your external walls are exposed to a water source such as rain, this water can enter your masonry, in some cases travelling laterally from your external walls to your internal walls. There are a few reasons why your masonry may have faults and each of these causes will have its own solution, which we will discuss here.