When connecting with Huepar APP and the Bluetooth Remote Control, the pulse mode can be switched ON/OFF via APP and remote control. The Bluetooth remote control / Huepar APP enables to select four 360° laser lines individually at a distance up to 98Ft. With Type-C charging port, the laser level can also be charged by laptop, power bank, car charger, etc. The laser line(s) can be temporarily turned OFF by the remote control/Huepar APP when need to leave for a while. The adapter is only compatible with: Huepar S02CG, S03CG/S03CG-L, S03DG/S03DG-L, S04CG/S04CG-L, P02CG, P03CG, P04CG

Pulse mode extends the working range up to 200Ft in brighter working conditions when using with Huepar Line Laser Receiver. The laser tool can connect two Bluetooth devices simultaneously. It can connect two Bluetooth remote controls, or two smart phones(whether on Android or iOS), or one Bluetooth remote control and one smart phone at the same time. LCD DISPLAY & BLUETOOTH TECH: Huepar s04cg has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously.In manual mode, when all laser lines are switched off, the laser tool will shut OFF automatically after about 5 minutes of inactivity.

The vertical angle against the wall can be adjusted by the fine-tuning knobs as well as the opening size of the clip. This laser tool utilizes the included large capacity Li-ion battery which is compatible with Samsung SB-L110 battery. Short press the "H" and "V" buttons on the keypad to switch the Horizontal and Vertical laser lines separately. With the lifting base, the 360° floor laser can raise from the surface to project over and travel past uneven surfaces or obstructions between 1" and 3.54" height. Huepar S04CG laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display.Slots for screws, nails, raceways or optional straps are designed to make the installation much firmer.