Keycap Puller Stainless Steel Key Keycap Removal Tool Keycaps Remover for Mechanical Keyboard for Removing Fixing Keyboard Tools

Product Information

The easiest method is to make sure the clips are opened a bit. Lower it around the sides of the keycap. Ruler and needle-nose pliers are not necessarily required but will make your life a lot easier. Apply some tape to the ends if you don’t want to mar up the paper clips. The Guangzhou Keycap Puller Kit is both convenient and easy to use. You will know how much easier it is as soon as you try one of these kits for those who often need to remove the keycaps from keyboards. We recommend getting a wire keycap puller because they are less likely to scratch the sides of your keycaps. A plastic keycap puller can scratch the sides when you try to snap it on.

You should only need a few rotations to secure this part. Then use the pliers to compress those wraps as a tight coil before moving on to wrap the outward bends. It is fairly easy if you don’t know how to use a keycap puller and should not take more than ten minutes. This is the last step and you now have a completed DIY wire keycap puller! Next-Level Keycap Pulling Tips Make sure that the keycap puller is large enough to fit your keycaps. If it doesn’t, you will not be able to pull them off without damaging them or yourself. Material Clean your keyboard: If you remove your keycaps, you can give your keyboard the deep clean it deserves! Now is the time to clean off all of the gunk and dust bunnies that have accumulated over the past few months.Repeat this process for another one of the straightened paperclips. You can use the first paperclip you bent to measure this piece. All you’ll need it a paper clip and your fingers. This is not a great replacement for a keycap puller, but can be done in a pinch if you need to take off one of your keycaps. You want a keycap puller that is adaptable enough to work with any kind of keyboard, regardless if it has ten keys or one hundred. It also helps if the design is compact so that it can be used even in small spaces. Durability Real” wired keycap pullers are generally inexpensive, usually a few dollars each for a generic one with plastic handle that will allow you to pull multiple caps before unloading and speed up your workflow.

It comes with a sturdy, four-prong extractor that keeps you safe from damaging the sensitive chip or PC board. With this kit for keyboard cleaning and customization, you can keep your computer pristine and perfect all the time. Read more article: ddr2 ram buying guide. This pulls all kinds of different keyboards, not just the ones that are mechanical. This product has been made as a great way to remove keycaps without the need to replace your entire keyboard. It will save you tons of money in the long run and make your life easier too. Making rotations with the wire wrap will require enough force applied to the keycap puller that you may have to straighten the paperclips again to create the final product. Begin making alternate rotations with the wire wrap around what will soon be the handle of your keycap puller.The Ortarco Keycap Puller Switch Puller is the perfect solution for laptop users looking to take care of cleaning their keyboards. With its simple brushes, you can easily clean your computer’s keycap. If you made the legs long enough, you should be able to pull two keycaps before needing to unload. Not as many as a traditional wire puller, but certainly more efficient and effective than a plastic one.