Mapei 113 UltraColor Plus Cement Grey Grout 2kg

Product Information

Kerapoxy Easy Design is a two-component, epoxy resin-based decorative grout, with glass micro-spheres and other Delivery charges vary for the following postcodes and will be delivered between 5-7 working days to the following postcodes: GY, HS, IM, IV41,IV30, IV42, IV44 – 49, IV55, IV56, JE, KA27 – 29, KW1 – 14, KW15 – 17, PA21 – 38, PA20, PA40+, PH9, PH15 – 20, PH32 – 44, PH49, PH50, TR21 – 25, ZE.

The use of a Scotch-Brite abrasive pad instead of the traditional cellulose sponge for cleaning joints is recommended in You must be available to accept delivery on the date you have requested, failure to do so will result in paying for a re delivery charge. Please refer to the Technical Data Sheet for further instructions on how to correctly prepare, apply and finish Ultracolor Grout grout.Always carry out preliminary tests before grouting stone or ground porcelain with a porous or rough surface. Mixing Mapecolor Metallic with Kerapoxy Easy Design of other colours may result in numerous metallic effects with Kerapoxy Easy Design does not guarantee a perfect bond when used as a grout if the edges of tiles are wet or contaminated with cement, dust, oil, grease, etc.

After the final cleaning operation, if the surface still has traces of Mapei Ultracolor Plus due to incorrect application, it may be cleaned down with an acidic cleaner (e.g. Keranet), by following the relevant instructions, at least 24 hours after grouting the joints. Only use Keranet on surfaces which are resistant to acid, and never use it on marble or limestone material. Due to insurance and health and safety regulations we are unable to transport goods into a Customer’s property After mixing the two components as described above, spread the adhesive on the substrate using a suitable notched Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e.g. a MAPEI sponge), working in a diagonal direction to the joints. Rinse the sponge frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge. This operation may also be carried out with a machine with a sponge belt or rotating disc. When the mix is partially set, after 50-60 minutes, a damp Scotch-Brite® sponge or an abrasive felt disc may be passed over the joints to even out the surface.

the aesthetic effect desired, within the limits described above (up to 6% for MapeGlitter, 3% for Mapecolor Metallic so that Applications for this product include: Grouting floors and walls in areas subject to intense traffic (airports, shopping centres, restaurants, bars, etc.) / Grouting floors and walls in residential areas (hotels, private houses, etc.) / Grouting floors and walls on façades, balconies, terraces and in swimming pools. excellent workability, much better than traditional epoxy mortars thanks to its creamy consistency, which guarantees All Mapei Ultracolor Plus grout colours are also available in a matching silicone – Mapesil AC Silicone. If using this grout with moisture sensitive natural stone tiles, a low modulus silicone is advised – Mapei Mapesil LM Silicone.

obtained and pour Mapecolor Metallic in it; cover it and manually mix to properly blend the powder pigment. Then mix of a 3 kg drum of Kerapoxy Easy Design), powder pigment based on very high-quality pearlescent mica, to create a

Follow Us:

CO 2emissions measured throughout the life cycle of ULTRACOLOR PLUSfrom the Zero line using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of renewable energy and forestry protection projects. A commitment to the planet, to people and to biodiversity.