Joined in 2023 
82 
63 About this deal
Put in the new battery exactly where the old battery was, then clip the battery wires onto the board. Then, with a flat, sturdy object, carefully lift the battery out of its position. Completely remove the battery and the disconnected wire. Sometimes, your device will prefer other devices that have been connected before, especially if you use that connection frequently. If this is the case, turn that other device off or unpair it from your device. 5. Move away from a Wi-Fi router. There are a few reasons why your Bluetooth headset is blinking red and blue. As mentioned previously, this is usually due to pairing mode. Bluetooth devices can have and store many connections. When you want to use one connection in a list of multiple connections, you simply have to choose that connection.
Sometimes, headphones in pairing mode are trying but failing to connect with another device. They’re running into an error during pairing, so they blink red and blue to let you know. Wait for the blue Bluetooth light to flash. You will also hear an indication voice saying, “ Connected.”
Your headphones’ batteries can become over-discharged if they haven’t been used for a while. This means they will need to be plugged in for longer before the battery can begin to charge again. 6. Make sure they’re properly seated on the charging stand or case Tap on the reset section at the bottom of the menu, then the reset button inside. Confirm the reset. If it doesn’t, the headphones likely have an error. In this case, you’ll need to do a hard reset. The headphones have an error and need a hard reset But, there are also a couple of other possible reasons – which we’ll cover below. The headphones are in pairing or discovery mode
Bluetooth headphones generally have light indicators, either on the charging case or the headphones themselves, to let you know if they’re charging. A slow pulsing blue light can mean the headphones are in pairing mode. The most common light pattern for pairing mode is blinking red and blue. However, you may still want to try pairing your headphones with another device to see if the pulsing blue light stops once it is connected. One way to find out if your headphones are disconnected from each other is if the sound comes through only one channel. Resetting your Bose headphones doesn’t delete them from your paired devices. You also get to keep your other Bluetooth settings. When you reset your Bluetooth headphones, you are reverting them to factory settings, thus eliminating any bugs or glitches that might be causing your problems.But the constant flashing can be annoying, especially if you’re in a dark room and the headphones are causing too much attention to themselves. There are various reasons why your headphones may not be charging. Let’s take a look at a few of the most common ones. Headset has a faulty battery. The batteries inside wireless headphones generally degrade after two to four years, depending on how well you take care of them. If you’ve only used your headphones for a few weeks and are already encountering charging issues, this might mean that your headphones’ batteries were defective from the start. The most common reason why your Bluetooth headset is flashing red and blue is it is unpaired. The headphones are looking for a connection. It lets you save the pairings you prefer so that you don’t have to go through the same process each time you use your headphones.
Great Deal 
New Comment