The #2 is a 1/4″ shaft, perfect for derailleur adjustment screws. It is the most common cross tip (“Phillips”) required. What size is PH0 screwdriver? I tried several different sets of screwdrivers and bits for them from different manufacturers. The results: PH3: 0.141 inches, PH2: 0.086 inches, PH1: 0.071 inches, PH0: 0.055 inches, PH00: 0.048 inches, PH000: 0.039 inches, and PH0000 is so tiny I really couldn’t get a consistent reading. What are the different sizes of Phillips screwdrivers? I presume a PH0000 screwdriver is intended to drive #0000 screws, a PH000 screwdriver is intended to drive #000 screws, and a PH00 screwdriver is intended to drive #00 screws, as these seem to be the only screws smaller than #0 in the inch-based “numbered screw” system. Use this precision Phillips #000 screwdriver to handle smallest fasteners in consumer electronics, laptops, tables, smartphones, and wearables. The Phillips #000 screw is the smallest fastener in the Phillips family and is used in the most compact electronic applications. Can a T5 screwdriver open a Macbook? Professional Philips screwdriver #0 3.0mm. Portable Size #0 x 0.98” / 3.0mm x 25mm. Phillips screwdriver PH0 satisfies your needs of DIY design / computer / cell phone / tablet / camera / laptop / electronics / toys / watch / jewelry / eyeglasses / radio / home improvement craft maintenance and installations.

Phillips head size #00 and 60 mm long by 3 mm diameter shank. Ergonomically designed polypropylene handle with thermoplastic rubber (TPR) grip with increased comfort and torque. What is the difference between a ph0000 and ph000 and ph00 screwdriver? PH-1 is a One-pole Electrode. PH-2 is a Two-pole Electrode, with a ground electrode and an operation electrode. Use PH-1 for liquids that contain a large amount of foreign matter. The #2 is a 1/4″ shaft, perfect for derailleur adjustment screws. It is the most common cross tip (“Phillips”) required.

You can only compare up to four products at a time.