Holts RW2GA Radweld Plus Coolant Leak Repair 250ml

Product Information

Autumn Statement: Workers to pay less in national insurance – but rate cuts don't offset the freezing of personal tax thresholds

Radweld is designed to be added directly into the engine’s expansion tank. You don’t need to drain or flush the system before you use it – just pour and go. Radweld works through the radiator channels to seal leaks without any clogging or damaging effects, so all you need to do is pour it in and let it repair the leak.Absolutely, and our products are not just for cars. Any vehicle with a cooling system can be susceptible to leaks. So, whether it’s a small car, large car, an SUV, 4×4, motorbike, van, or even static agricultural equipment, if it has a wet cooling system with a leak – pour in some Holts Radweld to get things running again. How does Radweld seal holes without causing clogging or damage? NatWest, RBS and Ulster Bank to close at least 172 branches in 2023/24 – here's the full list, plus alternatives

Radweld provides a permanent repair for small faults in the cooling system, including the hoses and radiator. It seals without damage or clogging and can be used in all cars and with any type of coolant/antifreeze. NatWest, Royal Bank of Scotland (RBS) and Ulster Bank, which are all part of the NatWest Group, will now shut at least 172 of their bank branches in 2023 and 2024. I did notice a bit of misting up the front in winter but it was gone after cranking up the fan a notch or two for about a minute. And when I took the dashboard apart I didn't come across any obvious signs of moisture , wet cables or the like.

How Does Radweld work to fix a radiator leak?

Radweld works its way through the system seeking out leaks and forming permanent repairs in minutes. The product has been carefully formulated to mix with all engine coolant and antifreeze. You pour it directly into the cooling system, no need to drain or flush the system first. Radweld also provides anti-corrosion protection and prevents future leaks; it will last the lifetime of the coolant in the system. How to Use Radweld These failures can occur via internal corrosion after using poor quality coolant/antifreeze, or through failure to follow the appropriate coolant change schedules. Or they could simply occur through external damage to a component of the cooling system. The only thing I noticed was what looked like a bit of old crystallised cooling fluid around the top right connection from the pipe that comes from the duo valve. Holts develop products for you right here in the UK, based on the ever-changing needs of the car market, so they’re easy to use. How it Works Yes, you can use Holts Radweld before an MOT. A leaking radiator can be expensive to repair, and could cause your car to fail its MOT, so solving the problem at home first can be an ideal solution.