full surface bonding with SikaBond® Dispenser-5400 / -3600 / -1800: solid and engineered wood floors (strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet as well as chip boards can all be bonded; To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options. Underfloor Heating: After thorough preparation and commissioning of the heating system, the entire floor area must be primed using a mixture of 1 part SikaBond 5500 S to 1 part Sika Thinner EG (by Volume). Roller apply and allow to cure. If, according to wood floor suppliers or producers deviation from the standards is permissible, temperatures between 5°C and 35°C must be observed for the adhesive.

Must be clean, dry, contaminant free and thoroughly cleaned with industrial vacuum cleaner.Anhydrite screed / Anhydrite flowable screed:

Substrate Quality: Clean and dry, homogeneous, even, free from grease, dust and loose particles. Paint, cement laitance and other poorly adhering particles must be removed. Standard construction rules must be observed. Concrete / cement screed:Must be clean, dry, contaminant free and thoroughly cleaned with industrial vacuum cleaner. underfloor heating: after through preparation and commissioning of the heating system, the entire floor area must be primed using a mixture of 1 part SikaBond 5500S to 1 part Sika Thinner EG (by volume). Roller apply and allow to cure; to 1.2 kg per meter square depending upon size of notched trowel used and subfloor surface profile.

the Sika® AcouBond®-System: solid wood boards (tongued and grooved), 3-ply engineered wood as well as chip boards can all be bonded; full surface bonding: solid and engineered wood floors - (strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet, wood paving (residential) as well as chip boards can all be fully bonded;Floor may be walked on sanded & finished approximately 48 hours after installation depending on climatic conditions,

reduces stress to the substrate: the elastic adhesive reduces stress transfer between the wood floor and the substrate; Sika SikaBond 5500S is a single part combination of synthetic resins contained in organic solvents. Concrete / cement screed: Must be clean, dry, contaminant free and thoroughly cleaned with industrial vacuum cleaner. All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.Clean all tools and application equipment with Sika Remover 208 or Thinner EG immediately after use. Hardened / cured material can only be mechanically removed. The product and its vapours are highly inflammable, ensure adequate air ventilation during application and curing. Clean and dry, homogeneous, even, free from grease, dust and loose particles. Paint, cement laitance and other poorly adhering particles must be removed. Standard construction rules must be observed.