Each battery will add 95A to the charge and discharge current. In other words, if 5 batteries are connected, you would expect to see 475A in either field. Note: the BMS will automatically turn off after a period of inactivity, however, it is a good idea to manually turn the BMS off to conserve battery power. Automatic Shutdown Choose the SOK 12V 100Ah Lithium-Iron Phosphate Deep Cycle Battery for reliable power, exceptional durability, and a range of intelligent features. Whether it’s for your RV, van life, off-grid cabin, or other applications, trust the SOK battery to deliver outstanding performance and value! Status – Displays 4 potential status – Charging, Discharging, Idle & Fault. A fault can be either of many scenarios, you can see which fault is active by viewing the second “BMS Status” submenu.

Ensure the BMS(s) in all batteries have been de-activated – this means none of the LED lights on the front panel are illuminated. These batteries have a 7 year manufacturer warranty with an additional 3 years provided by Current Connected for a total of 10 years. If you ever have any issues with the product, please call us. Our team is on standby ready to help you. Our business relies on happy customers with working solutions, so if the battery is not working for you it is our job to provide the necessary after-sales support to turn a product into a solution. We have the faith and have done the testing to know these batteries will last a long time, and we are here for you through the entire duration of ownership. Do I need to register for the extended warranty? Ensure all batteries are in the “BMS-OFF” state prior to installing the cable(s) as explained in the shutdown procedure. After the cable(s) have been installed, power up the system per the proper pre-charge procedure. Settings: Yes! An added bonus is that this battery supports full closed-loop communication with ALL Sol-Ark Inverters. In fact this is the easiest inverter on the market to setup battery communications with.

Built-in LiFePO4 battery cells - 4 pcs 3.2V 100Ah in series, doubling the life span of other LiFePO4 battery brands. Enhanced Safety Features: The built-in smart BMS provides comprehensive protection against overcharging, discharging, and short circuits. It also features low temperature charging protection, ensuring optimal performance even in extreme conditions. UL 9540 is a safety standard for an energy storage system (ESS) and equipment intended for connection to a local utility grid or standalone application. It designates key issues associated with ESS. UL9540 certification is currently in progress. The time for completion is not currently set in stone, but is targeted for mid 2023. UL 9540A (Fire) certification Product that was used on an over-sized inverter/charger (any inverter/charger that is rated to 3500 Watts or greater) without the use of a Manufacturer-approved current surge limiting device.

Communication between batteries (via BMS) and inverters and charge controllers has been a great advancement over simple voltage-based controls. All the parameters that control the charging/discharging behavior are calculated by the BMS and transmitted to the inverter / controller, reducing user-intervention and chances of mistakes due to misconfiguration. Thorougly inspect the system for any miswiring (loose connections, short circuits, reverse polarity) and correct any issues before proceeding SOK models have a temperature performance of (-22~140°F) for discharges and (32~140°F) for charges and a BMS Low/High-temperature cut-off of 32°F/149°F respectively. On the other hand, Lion batteries have an operating temperature range of (32~113°F) for charges and a range of (-4~131°F) for discharges. Third Party Testing: UL1642 & UL9540 testing in progress. Anticipated September 2022, UL1973 (Cells)If you have properly established the connection to the battery, the software should load the voltages and show statuses of the battery. In the top-right corner of the program there is a readout that shows the default protocol as “Pylon(DeYe) CAN”. Li Time 12V batteries have incredible surge capacity with their own dedicated BMS. Their trolling motor battery has a better surge than anything I have tested! Damage due to improper installation; loose terminal connections, under-sized cabling, incorrect connections (series and parallel) for desired voltage and AH requirements, or reverse polarity connections .

Press the “RST” button on one of the SK48v100 batteries to power on the BMS, making sure to keep the DC breaker on this battery in the off position. is the most optimal absorption voltage, however if the charger doesn’t let you program this voltage, anywhere from 57.6 up to 58.4v is still safe and within normal operating parameters for these batteries. Absorption Time Safely eject the SD card from your computer and insert it MicroSD port on the underside of the Raspberry Pi. The battery is equipped with high and low temperature disconnects, adding an extra layer of protection in extreme temperature conditions.The SOK 100ah Lithium Deep Cycle battery has been on the market for over a year and is one of the best selling batteries for good reason. This battery will do what you need it to, and it lasts a really long time - 4000-8000 cycles! Great for Vanlife, RV's, Off-grid cabins or anything that needs reliable power.

For systems using only 1 battery, navigate to setting 11 (Maximum charge current) and set this parameter to 95A. This is the maximum charge current one single battery allows with a touch of margin for error. For multi-battery systems, this setting can be set no greater than 95*(number of batteries).

Does this fit into a standard “group size” battery box?

Success! You can now select the Dashboard, Charts, Totals, or Power menu tab to view real-time updates from your SOK 48v100Ah battery.