Tower T17086 Vortx 5 in 1 Air Fryer and Grill with Crisper, 5.6L, Black

Product Information

During use, hot air and steam Is released through the air outlet openings. Keep your hands and face at a safe distance from the steam and from the air outlet openings.

You can also use the unit to reheat ingredients. To reheat ingredients, set the temperature to 150°C for up to 10 minutes. Add some oil to fresh potatoes for a crispy result. Fry your ingredients in the unit within a few minutes after you added the oil.With the probe in place, open the unit's lid and place the relevant ingredients inside, ready for cooking. As the outstanding balance, plus the interest now form part of your payable balance they will attract interest Note: Adjust baking times on conventional recipes by about 10 minutes, to account for the unit's powerful cooking performance. When the cooking process is done, the unit will give off a sound prompt and the LED display will show 'End' to indicate cooking has ended. When this occurs, open the unit's lid, remove your food and allow it to stand for about a minute before enjoying.

Note: The probe will not provide accurate readings unless placed into the item correctly. DO NOT insert the probe into the item vertically or at an angle. Note: The baking temperature for specific items can also be set automatically, using the Temp ACE function and the unit's temperature probe. Refer to the relevant section for instructions on how to carry out this measurement. If in doubt consult a qualified electrician who will be pleased to do this for you. Non-Rewireable Mains Plug

Fry, roast, grill or bake your way to deliciously healthy meals with the Tower Vortx 5.6L 5-in-1 Air Fryer and Grill with Crisper.

Press the corresponding key on the unit's control panel to select each cooking mode. The corresponding indicator will light up and the unit's LED display will show the default time and temperature for that mode, to show it has been selected. Note: The grilling temperature for specific items can also be set automatically, using the Temp ACE function and the unit's temperature probe. Refer to the relevant section for instructions on how to carry out this measurement.