Yealink SIP-W52P Cordless Phone

Product Information

Up to 6 repeaters can be registered to one base station to extend available reception range for all registered handsets. All repeaters must be installed within the base station coverage area (up to network/router level settings that must be applied, or the Horizon service will not work. For further details on these please refer to the Horizon user guide. Eco mode greatly reduces the transmission power and signal output when the phone is in the talk mode. The attenuation range is 20m. When the distance between the base station and the handset Repeater mode extends the radio coverage of the base station. The repeater has the same radio coverage as the base station. This feature is especially useful for users who require mobility in large

Ring tones are used to indicate incoming calls. You can set 9 different ring tones to distinguish the incoming line on your handset. You can also set a ring tone for an incoming intercom call. When receiving an incoming call, the handset rings the specified ring tone. The handset provides you with 12 different input methods. You can disable the infrequently used input method. Then you can only switch among the enabled input methods when editing. The resetting process may take a few minutes. Do not power off until the base station starts up successfully. If your phone is malfunctioning or requires updates you or your phone system administrator may want to perform one of the following:Before upgrading to the latest firmware you should read the related firmware notes and possibly consult with Yealink's support to ensure there are no compatibility issues or other potential conflicts. If such issues or conflicts do happen after an upgrade you may need to downgrade to a previous firmware version or perform a factory reset.

On the Firmware releases section you can find the base station FW and the handset FW which corresponds to each base station FW. Restarting the base station is usually a safe and easy method to resolve functionality issues. However, you may want to consult your phone system administrator first to make sure the issues are not related to network problems or other external causes. When the DND is activated, all the incoming calls will be rejected automatically. Below are the steps After a while, the LED indicator on the repeater double flashes, and the repeater is ready for a newYou can enable the keypad light to make the keypad light up when any key is pressed. This helps you distinguish keys from each other in a dark environment. The power indicator LED and network status LED on the base station slow flash in sequence during the resetting process. Indicator LEDs on the base station illuminate solid green after startup. This user guide will help you to navigate and use your Yealink W52P. It will give you an overview of your handset, and walk you through tasks so you can successfully use your phone to perform basic and advanced functions. The handset menu has a number of levels. The main menu is the top-level menu, which consists of six menu items: Status, Intercom, Voice Mail, Call Features, Directory and Settings. A dialog box pops up to prompt “Handset Firmware of the SIP DECT phone will be updated. It will take 5 minutes to complete. Please don't power off!”.

The changeable shortcuts are the two soft keys and four navigation keys. The available features that can be assigned to each key may vary.In this case an extended coverage range (30m) is required. You can install a repeater within the base station coverage area. The separation distance between the base station and repeater is 30m. If the repeater is placed correctly (overlapping the coverage area of the base station), the handsets can move freely within the total coverage area while on a call.

You can configure the date format of your device. The handset supports seven date formats. The available date formats are listed in the following table: The Yealink W52P is a DECT Cordless Phone System that was designed with the residential and small business user in mind. The Yealink W52P is a scalable solution that supports up to five handsets, has a crisp full color display, PoE support, and excellent battery life.Factory reset: This erases the current configuration and applies the original configuration the phone was shipped with from the factory.You can reset the the base station or each individual handset. I have had this problem with 3 customers know with the previous two I have ended upgrading all hardware