Joined in 2023 
82 
63 About this deal
Find the firmware file. This one is “Network Management Card v6.5.0 Firmware for Symmetra 3-Phase with AP9630/AP9631/AP9635” Updating or flashing firmware is necessary to implement new features, correct bugs, or when moving the network card from one UPS family to another.
The command line interface provides options to configure the network settings and manage the UPS and its Network Management Card (NMC). How to enter commands Example: To configure the TCP/IP port to communicate using 100 Mbps with half-duplex communication (communication in only one direction at a time), type:Description: Exit from the command line interface session (this works the same as the exit command). radius Note: This add-on option is only able to monitor the UPS, and not any power distribution. The embedded NMC within the UPS must be used to monitor any power distribution. When you log on as Device Manager (equivalent to Device User in the user interface), you can access the event log, configure some UPS settings, and view the number of active alarms.
Kit includes all necessary parts to install an AP9635 for all G5000 UPS serial numbers and firmwares.To obtain information about the purpose and syntax of a specified command, type the command, a space, and ? or the word help . For example, to view RADIUS configuration options, type: radius ? printed format and on the Network Management Card Utility CD in PDF to configure the TCP/IP settings of the To configure the TCP/IP settings, see the Network Management Card Installation Manual, available on the Network Management Card Utility CD and in printed form. To detect internal problems and recover from unanticipated inputs, the Management Card uses internal, system-wide watchdog mechanisms. When it restarts to recover from an internal problem, a System: Network Interface restarted event is recorded in the event log. Network interface watchdog mechanism
How to upgrade APC Network Management Card 2 (NMC2) AP9630, AP9631, and AP9635 remotely over a network. Description: View a list of all the CLI commands available to your account type. To view help text for a specific command, type the command followed by help. To enable or disable these access methods, use the Web interface. On the Administration tab, select Network on the top menu bar, and then the access option under Console on the left navigation menu. The command response codes enable scripted operations to detect error conditions reliably without having to match error message text. Local access to the command line interface from a computer with a direct serial connection to the Management CardAt the command line interface, use commands to configure the NMC. To use a command, type the command and press E NTER. Commands and arguments are valid in lowercase, uppercase, or mixed case. Options are case-sensitive. Supports using a Dynamic Host Configuration Protocol (DHCP) or BOOTstrap Protocol (BOOTP) server to provide the network (TCP/IP) values of the NMC Ships with AP9630 pre-installed in units manufactured post 2012. Older G7000 models require a special upgrade kit pre-2012 manufacture date. Press the U P arrow key to view the command that was entered most recently in the session. Use the U P and D OWN arrow keys to scroll through a list of up to ten previous commands.
Some ups options are dependant on the UPS model. Not all configurations may support all options of the ups command. To access the command line interface, you can use either a local, serial connection, or a remote connection (Telnet or SSH) with a computer on the same network as the Network Management Card (NMC). PowerChute Network Shutdown — Provide unattended remote graceful shutdown of computers that are connected to UPS devicesUse the user interface or the command line interface to view the status of the UPS and manage the UPS and the NMC. You can also use SNMP to monitor the status of the UPS. The Stat field reports the NMC status. The middle status varies according to whether you are running IPv4, IPv6, or both, as indicated in the second table below. Description: Configure the power parameters: this enables you to show and configure transfer points, sensitivity and output voltage. For local access, use a computer that connects to the Network Management Card through the serial port to access the command line interface: Provides the ability to export a user configuration (.ini) file from a configured card to one or more unconfigured cards without converting the file to a binary file
Great Deal 
New Comment