Awesome Original Hubba Bubba Bubble Tape

Product Information

Cut a piece of tape that is long enough to cover the gap left after removing the old tape. It should also be able to overlap with the existing tape at both ends. It is very simple to fix these annoying bubbles in Drywall mud. You simply need a putty knife, utility knife, joint compound and lastly a roll of paper tape and you can complete this fixing process easily. Thus, if any inexperienced person is facing this problem then just consider it as a common situation. Rather than Sanding your drywall tape, it is best to follow the steps discussed above in this article to resolve the issue. How Do You Fix Bubbles in Drywall Mud? If you have used too much joint compound, then it is important to scrape it down with a drywall trowel after being dried off.

You can expect the perfect and smooth drywall from expert drywallers but still, it can be done by yourself by following the process discussed in this article. How To Fix a Bubble in Drywall Tape? 8 Easy Ways Explained! Removing and fixing air bubble issues in drywall tape does not take long. If the below steps are followed diligently, you would be amazed to see the results. It’s going to be a seamless finish which looks amazingly beautiful after the final painting is done. I always recommend fixing this issue as and when encountered. Can You Paint Over Bubbled Drywall Tape?Now Wait 24 hours for the joint compound to dry, then sand and apply additional coats of joint compound. It is never a good idea to paint over bubbled drywall tapes. When the drywall tapes remain unpainted, the bubbles are not observable too much but as and when they are painted the more bubbles form and flaws become easier to spot. This is the last but most important step. After repairing you need to allow 24 hours to dry out and let the joint compound set thoroughly. How Do You Fix Bubbles in Drywall Tape After Painting? To ensure accuracy, measure and mark the joint and both pieces of drywall correctly. Be careful when applying the adhesive, using only the appropriate amount – neither too much compound and nor too little. Conclusion

To make the new tape blend seamlessly with the premixed joint compound, use a putty knife to smooth it over the surface.Then remove the air-bubbled part of the tape and put a joint compound and again paint it carefully. Is it Normal for Drywall Tape to Bubble?