This article was last updated on August 7th, 2021 at 1:15 am Best Wood Wax and Wax Polishes Reviewed When applied to your wooden or painted surface, the wax will be clear. After removing the excess and allowing it to harden for 5-10 mins, you can either leave it for a matte sheen or buff it to a beautiful lustre! The choice is yours. Not linked to the office-supply store, this wax has been made in New Hampshire since 1897. Whereas most waxes make a virtue of containing beeswax, this one specifically excludes it (along with silicones). Like the S.C. Johnson wax, it was easy to apply and manipulate with a wet feel, but it was harder to buff away all the surplus, with some smearing left on the mirror despite frequent cloth changes. It produced a slightly lower-than-average shine. For reasons of hygiene and safety, personal grooming products, cosmetics or items of intimate clothing cannot be returned.

Here are a few important things to know about using wood wax and wax polishes. With these tips, you should be able to get that finish you are after, and not be disappointed with the results. Things you should/shouldn’t do when applying a wood wax or wax polish Tip: It’s always a good idea to put a layer of clear wax over the piece beforeusing your dark wax. A little bit of dark wax goes a long way, and if you apply it before you use clear wax it can be difficult to remove. While you can use wax on bare wood or wood that has only a thin penetrating finish, you must apply several coats before you begin to get a modest sheen. At the other extreme, on a very high-gloss finish such as rubbed out lacquer or a French polish, wax is superfluous and can actually detract from the finish. I decided to use cherry for the test boards and to finish them with a washcoat of shellac and three coats of a wiped-on poly. This resulted in a moderate sheen, but with the grain structure still easily visible. Apply, then buff. Schofield applied each wax using the outside of a fairly open-weave cotton cloth, monitored how long it took to dry, and then buffed the surface with some soft cotton flannel from an old pair of pajamas. This wax contains olive oil and carnauba wax, but no solvents or petroleum by-products. It is quite hard in the can, but it has an oily feel when applied. The wax never dried completely and I was unable to remove all the smearing during the mirror test. It yielded the lowest shine of all the waxes. For a less dramatic effect, try our Espresso Wax! Espresso Furniture Wax gives you the perfect amount of instant vintage age with a soft subtle rich espresso brown look. Think of sepia!

Latest articles

Equally, some waxes buffed out completely to leave a clear, shiny surface (above), while others remained smeary no matter how often Schofield turned the cloth to a clean section.

Let it sit a while before buffing. Many people make the mistake of throwing the wax on there and then start trying to buff straight away. This is a no-no, especially if the wax has solvents as they have to evaporate before you try to do any buffing. I would say leaving it a minimum of 30 minutes before you try buffing. This wax has a pleasant orange scent. It was very easy to apply, with an almost wet feeling. The instructions say to wait 3 to 5 minutes or until a haze develops before buffing. After 15 minutes it smeared rather than buffed, and even after nearly 40 minutes it didn’t seem to really buff out. The shine is toward the lower end of the range. Furniture Clinic’s Beeswax Polish, is a natural product that has proven a big hit with people looking for a finish that is free of synthetic ingredients, yet still delivering the goods. Due to its natural formula, this wood wax will not affect the colour of the wood that you apply it on to, but instead will revitalise it and bring out the original look, only enhanced and with a top class shimmer. Make sure you buy the right type of wax. Some waxes can be used for both painted and unpainted wood, but some can’t and their solvents can actually damage the paint coat. Also, if you want the wood to be stained darker, you should probably be one that has a darker shade, and not as clear one. Clear waxes are meant to bring out the wood’s natural shade and offer protection. They are not wood stains.Using a soft cloth or brush, apply a thin layer of wax to the furniture surface. Be sure to follow the grain of the wood. The permissions of Consumer Credit Compliance Limited as a Principal firm allow Oak Furnitureland Group Limited to undertake credit broking. It’s so easy! Once your wax is brushed or wiped on, use a nice soft and plush applicator to buff. We like to use a rag bunched up into a soft “pillow” or one of our applicator pads. Buff with light pressure in small circles until you’re happy with the results. Usually, the wax will get very smooth and slippery once it’s buffed. This wax has a mineral spirits smell and is quite hard. It was slippery and very easy to apply as an even coating. Buffing does require some effort but the resulting shine is pleasant.

These waxes are very versatile. They can be used for furniture restoration to art work and more! Can be used on concrete, cast iron and other materials to richen their look. One of the greatest strengths of this wax polish is that it is incredibly versatile, and can be used on kinds of surfaces; from wood, to tiles, and even metal, you’ll have no problems using Briwax. Although it can be used on such materials, where it works best for me is on an unpainted piece of wood, where it will leave you with a nice shine, while protecting the wood itself, and without staining or changing the original colour.Apply a little at a time. You don’t want to put too much on there all at once or you’ll find that it’s hard to buff it properly, and end up with a displeasing finish. Fusion Furniture Wax is based on an old family recipe for museum-quality wax. Our furniture wax is safer to use than many other brands on the market, as it does not contain volatile and smelly solvents. It is very easy to use and does not require a lot of elbow grease to buff to a shine.