Connect your coaxial cable to the testing equipment and run the test. The specific steps will depend on the equipment you’re using.

Analyze the results provided by the testing equipment. This could include information about signal strength, signal quality, and any potential issues with the cable. One reason behind the signal loss & performance could be your coaxial cable, the sole reason being exposed to the external environment. If you have to narrow down the issue, you’ll require certain tools before you begin. What do you need?

How do Network Testers work?

You can use a cable modem with an active internet service to test cable outlets or signals from the coax cables. The only hardship is moving the modem around.

You can test your coax outlet’s signal by taking your cable modem from cable outlet to cable outlet manually, and plugging it in to each coax outlet to verify a signal and connectivity. If your internet modem connects like normal, that means a signal was detected. If it doesn’t connect, then you have no signal. This method of moving a modem from place to place can be very time-consuming. The market leading brands such as Fluke Networks or Ideal Networks specialise in producing high-end Network Cable testers. These devices are very accurate but may be very expensive. For many installers or DIY enthusiast, basic or less-expensive models from our range would be an ideal choice. Analyze the tone emitted from the multimeter’s speaker. If a tone is emitted, then the coaxial cable is working correctly and the signal is not breaking through it. Consider whether the length of your cable could be contributing to any signal issues. Longer cables can result in greater signal loss. The shield to center test: The test is performed to determine continuity between the copper conductor wire and the shield. Continuity, if detected here, signifies a short in the cable, and it’s due to be replaced.For efficient tracing and testing of a coaxial cable, consider using a standard tool like the Klein Tools VDV501-851 Coaxial Cable Explorer & Tester. Consider the environmental conditions where your coaxial cable is installed. This could include temperature, humidity, and physical stress. On the remote, you can see the cable’s status through the LED panel on the tester. This LED panel is quite easy to read and it has indicators for a pass, open, short conditions, and the location of every cable. If you have multiple coaxial signal cables connected via a cable splitter, especially when they’re in the wall, you should match the ends of a particular coax cable. Using a coaxial cable tester, you can perform this task easily. This device is highly rated by users worldwide for its ability to test coax cable continuity and map the cable at four locations simultaneously.