YS is a type of mount used on some strobes and lights. On the Sea & Sea YS01 and YS03 strobes it is fixed in place while it’s an option on larger Sea & Sea and all Inon strobes among others. The cold shoe mounts for this type of fitting have a flat section with a bolt hole which the YS mount on your accessories fits over. The most common devices that people attach to their cameras using cold shoe adapters include microphones, video monitors, and LED lights. And of course, there are also ones designed for GoPros. They’re often used to let you record video via GoPro while you’re taking pictures with your main camera.

Until now, there are different kinds of designs. The most basic one is in the L shape. What’s more, some options are equipped with a adjustable arms so you can mount your microphone on it and adjust it to a perfect angle to capture clear audio. Double cold shoe mount is also available. This is really useful if you are taking two-person recording. You can mount two microphones in a neat way and start the recording. Uses Wireless PRO is capable of recording three different audio sources at the same time - two transmitters, and a receiver mic. The receiver outputs a stereo signal from both its USB-C and 3.5mm connections, resulting in two audio channels. These channels can be routed to the output in a number of different ways, but by default Merged mode is selected. In Merged mode, the two transmitters and receiver microphone, if it is being used are combined into a single summed output. This is useful for live presentation setup, or only using one transmitter and want the audio to be recorded onto both channels of your recording device. Other modes include Split mode - where each transmitter's output is recorded onto separate left/right channel, allowing individual processing in post production; and Safety mode - where the Wireless PRO will also output a second channel of audio -10dB lower than the main channel, useful for reducing the risk of clipping. When Safety mode is activated, all inputs from transmitters and receiver microphone are be merged to the left channel and the safety channel will be output to the right channel. Getting the Down Low : Low light shooting terms, definitions and the exposure triangle in operation. Polar pattern: Omnidirectional. Frequency response: 20Hz - 20kHz. Maximum SPL: 123.5dB SPL. Equivalent noise: 22dBA, A-weighted. Signal to noise: 72dB. Transmission range: 260m (line of sight). Battery type: Lithium-ion. Operating time: Up to 7hours. Charge case battery capacity: 4200mAH. Power requirements: 5V, 3A via USB type-C. Charge time: 2.5hours. Dimensions (WxHxL): 44 x 46.5 x 20mm, transmitter/receiver; 101 x 70 x 82mm, charge case. Weight: 35g, transmitter; 36g, receiver; 177g, charge case; 284g, total. Choosing a Compact Camera For Underwater Photography. Phil Medcalf and Adam Hanlon chat on Wepixel LiveYou can use a cold shoe in the same way as a hot shoe. You are simply losing the functionality of the hot shoe. There are also many accessories that do not have electronic connectors, but still use the cold shoe as a form of attachment point so that you can slot it into the hot shoe of your camera and have it be accessible atop your camera. With all sorts of cold shoes available out there, it helps to know what type you need. Do your research and figure out what you want to use. You should also make sure if it’s compatible with your camera system. An example of this would be that a microphone passing the audio information to the camera through the hot shoe. The camera could then decide to maintain a certain level based on your camera settings. Recommended Products Another popular dual shoe mount contender is the Cheetahstand 3 Speed Light Hot Shoe and Umbrella Holder. However, its construction feels like a plastic prototype for the Westcott, making it tough to stand behind. Our studio unit is also broken, with the top mount having broken off through normal use. Here are the options for dual cold shoe mounts if you needed to mount multiple speedlights or small strobes.

These mounts don’t have the flexibility of ball mounts but are less expensive than them because you don’t need a clamp to attach the accessory to the mount.

If you have used your wireless hot shoe remote and wished you didn’t have to keep tilting your camera to read the display, this is the device you need. This device puts the display at a much more comfortable viewing angle to save you from frustration — especially when operating your camera from an elevated position, such as a tripod. What is a Cold Shoe? To go deeper, hot shoe locates on the highest point of camera or is set beside the pop-up flash. You can use it to connect different devices like flash, GPS device, etc. without cable connection. It frees your hand and helps a lot when you don’t want to bring stand for your devices.

Like all the cold shoe variations we discussed in this article, cold shoe extensions also have different designs. Of course, there’s the basic L-shape design. But some options also have adjustable arms. And then there are even double mounts that allow you to attach two flashes on top of your camera. Included accessories: 2x Wireless Pro transmitters, 1x Wireless Pro receiver, 1x Charge Case PRO, 1x SC2 ​3.5mm TRS to TRS cable, 1× SC21 USB-C to Lightning cable, 1x SC22 USB-C to C cable, 1x USB-C to C superspeed cable, 2x MagClip GO, 3x Furry, 2x Lavalier II ​microphones, 2x Pop Filter for lavalier, 2x Mic Clip lavalier, 2x Mini Furry lavalier, 1x Accessory Case, 1x Lens Cloth.You need to be aware that cold shoes with electrical connections are uncommon these days. The reason is that you can now connect your camera directly to your flash using a PC-sync cable. Included accessories: 3x SC20 USB-C to USB-A cables, 1x SC5 TRS to TRS memory cable, 3x furry windshields, 1x carry pouch bag. If you’re ready to level up your photographic options, a cold shoe mount means you have a second set of hands no matter what. But if you think a cold shoe has something to do with the temperature of your footwear, rather than a handy way to mount your camera equipment, this blog will help get you up to speed. How Do I Use a Cold Shoe? Cold shoes might not have any electronic connections, but they still provide plenty of functionality even when using them on your camera. Capture a Dynamic Event Frequency range: 50Hz to 20kHz. Maximum input level: -20dBV, 3.5mm input. Maximum SPL: 100dB SPL, 1m, microphone. Transmission range: 200m, line of sight. Dimensions (WxHxL): 45.3 x 18.3 x 44mm, transmitter; 45.5 x 18.3 x 44mm, receiver. Weight: 30g, transmitter; 32g, receiver.

Thanks for reading this. Apologies for it being more sales orientated than some of the other blogs on here, but I’ve written this in part for customers who enquire about cold shoe mounts so that they can see all the options laid out. DSLRs and mirrorless cameras began including video recording features. Since then, the hot shoe became a perfect place to mount all sorts of video and audio accessories. We know that the difference between a cold shoe and a hot shoe is that a hot shoe can produce electrical signals to trigger your flashgun. But did you know there are also cold shoes that can connect electrically to a camera’s hot shoe?Transmission is via digital 2.4GHz for up to 200m line of sight range, and 128-bit encryption is used to prevent crosstalk. The Wireless PRO receiver features an LCD display that shows you critical information including audio levels, connectivity, and recording status. System settings can also be controlled via the receivers menus and left/right navigation buttons, either with a short-press (less than 1 second) or long-press (1 second or more). Three buttons allows the use to operate functions depending on which screen is displayed, corresponding to the on-screen symbols.