Joined in 2023 
82 
63 About this deal
Our anti-mould additive has been professionally developed and tested to ensure it effectively prevents mould growth. It works even in high-humidity areas such as bathrooms and kitchens. Cooking, boiling pans and using the kettle create a lot of steam in a kitchen. As do activities such as washing up, clothes washing and using a tumble dryer. Opening windows wide whilst doing these activities will provide ventilation and allow the warm air to escape rather than cause condensation on the window. Double-glazed windows will never have condensation trapped between the two panes of glass unless they are faulty. If this happens, then the windows will need to be replaced. Dehumidifiers vastly improve damp and condensation problems in a home because they reduce moisture levels. They’re most useful in rooms where there’s a lot of humidity. For example, a kitchen or bathroom. A room where clothes are dried. Or in a bedroom where condensation builds up from the heat caused by breathing. Ellis Cochrane has been a Freelance Contributor for Ideal Home since 2023. She graduated with a Joint Honours degree in Politics and English from the University of Strathclyde and between her exams and graduation, started a lifestyle blog where she would share what she was buying, reading and doing. In doing so, she created opportunities to work with some of her dream brands and discovered the possibility of freelance writing, after always dreaming of writing for magazines when she was growing up.
We know that finding everything you need for a DIY project can be time-consuming and expensive – hopefully we’ve made it that little bit easier for you. Buy our Mould Removal Kit here and get rid of mould on your walls for good. General Preparation - Once the surface is dry, scrape off any loose flaking paint and rub down. Previously painted surfaces must be etched using sandpaper. Papered Areas - Spray the paper. The MCS1 Mould Clear Solution acts as a biocide and stripping agent. Bag the mould contaminated paper and remove from the property. Treat the exposed plaster with a thorough spraying of MCS1 Mould Clear Solution. If extractor fans aren't cutting it, the next thing to consider is a dehumidifier, which will draw moisture out of the air. These can be particularly useful if you often dry clothes inside the house – another common source of excess humidity. There are different types and brands available, so read up on how to buy the best dehumidifier to find one that does the job. Prepare your surfaces by removing any loose material e.g. flaking paint or wallpaper. Make sure the surface has a smooth finish.The full range of innovative and effective products is available from our merchant partners or online. Benefits and features
Signs of damp in a home are damp patches on walls, flaking plaster, peeling wallpaper and mould growth. You may also notice a distinct, musty, damp smell. Here’s our advice to remove this odour. Ensuring that the surface is fully dry, apply the paint as per manufacturer’s instructions. Allow to dry fully before applying a second coat.Paraffin and portable flueless bottled gas heaters: These heaters put a lot ofmoisture into the air - one gallon of gas or paraffin produces about a gallon ofwater vapour. If you have a problem with condensation, try to find an alternativemeans of heating. A desiccant dehumidifier extracts water from the air using an absorbent material. The material is heated to turn the moist air into water, which then drips into a water tank. This type of dehumidifier is best suited to cold, unheated rooms.
Great Deal 
New Comment