Do not mix the components of Gédéo Glaze Resin with other components of the Gédéo resin range. (Crystal Resin, Color Resin, Pearlescent Resin) - Do not exceed 150ml of Glaze Resin preparation per mixture. Mix the two components well until they reach the corners of the container (incomplete mixing does not guarantee hardening, mixing too vigorously will cause bubbles to appear). Transfer the mixture to a second container and mix again to ensure the homogeneity of the resin and optimal mixing. Mixing operations can take up to 5 minutes depending on the quantity prepared. Hi! I'm Lucy, the owner of Crystal Resin! Being a Taurus and a naturally creative spirit, I graduated with an art degree in 2014 and after a few years of soul searching, started renting a studio space, where I explored a variety of different art mediums before discovering epoxy resin. To know the quantity of each component and not waste the product, fill the mold to be used with water and pour into a measuring container. Note the volume obtained.

Mix the two components well until the corners of the container (incomplete mixing does not guarantee hardening, mixing too vigorously will cause bubbles to appear). Transfer the mixture to a second container and mix again to ensure homogeneity of the resin and optimal curing. We advise you to protect your creations with the application of a layer of Bindex glossy 24 hours before pouring the Crystal Resin. To know the quantity of each component and not waste the product, fill the mold to be used with water and pour into a measuring container: one third of the volume for the hardener and two thirds for the resin. Dry the mold and the measuring container well before pouring in the Crystal Resin. Allow to dry for 12 hours in a dust-free environment. Setting time is progressive and variable depending on ambient temperature and humidityIt is ideal for creating laminates and for giving relief and shine to flat surfaces: scrapbooking, photos, card making, souvenirs, boxes, badges, furniture decoration, object recovery, "magnifying glass" effect on canvas, enamel effect. Bio-based epoxy resins Sand after three days at a temperature of twenty-five degrees Celsius. The goal is to get rid of any excess formed as a result of pouring. Allow to dry for 6 hours in a dust-free environment. Setting time is gradual and variable depending on the ambient temperature.

In a dry and clean container, pour first 1 part of Crystal B hardener and then 2 parts of Crystal A resin. As mentioned earlier, Crystal Resin is easy to use, and we will explain in the following points the most important steps to use: The resin takes on the surface appearance of the substrate into which it is poured. A matte mold will give a matte finish, a glossy mold a glossy finish. Includes 200ml of crystal resin and 100ml of crystal hardener, along with two measurers, two mixers and a guide In a dry and clean container, pour first 1 part of Glaze B hardener and then 2 parts of Glaze A resin. Start the stopwatch.

Crystal Resin now not only creates beautifully crystallised worktops, wall art and homewares, but also sells consciously sourced healing crystals, fossils and orgonite towers. In a dry and clean container, pour first 1 part of Glaze Hardener B and then 2 parts of Glaze Resin A. Do not exceed 150ml of Gédéo Crystal Resin preparation per mixture to limit any risk of overheating.