Liberon SDDO1L 1L Spirit Wood Dye - Dark Oak

Product Information

Gel Stains: Gel stains are a fantastic option for achieving an even finish on oak. They provide excellent control and minimise the risk of blotching, a common issue when staining oak. Gel stains sit on top of the wood surface rather than penetrating it, making them easier to apply and allowing for better colour consistency. They are also available in various hues, offering versatility in achieving multiple decorative effects. A Medium Oak Wood Stain is known to have a lighter natural brown undertone to it. Although we don’t have a Medium Oak Wood Stain in our range, we would recommend our Natural Oak Wood Stain as a great alternative. If you are unsure of the wood stain colour, test it on an unseen area first. The stain can be applied with either a cloth, bristle brush, or for best results a Foam Brush. Apply the stain liberally going in the direction of the grain. Leave it to soak in for a minute or two and then wipe any excess of using a Lint Free Cloth. The grain patterns in oak wood vary significantly, ranging from straight and uniform to wild and pronounced. These unique characteristics make oak an excellent choice for staining and finishing, adding depth and dimension to the overall appearance. Like all the colours available, both of our Oak Wood Stains are highly concentrated and effectively colour wood in one simple application. Applying Light Oak Wood Stain

Polyurethane: Polyurethane finishes are popular for oak wood for their durability and versatility. They come in various sheen levels, including gloss, semi-gloss, and satin. Polyurethane forms a protective layer on the wood surface, shielding it from moisture, scratches, and stains. It’s relatively easy to apply, and multiple coats can be added for increased durability. The mixture fulfils neither the PBT nor the vPvB criteria for mixtures in accordance with annexe XIII of the REACH regulations EC Most importantly, remember to experiment and test different staining techniques, as each project and piece of oak wood may require a unique approach. With proper preparation, patience, and the right products, you can transform ordinary oak wood into an extraordinary work of art.A. Yes you can. Our Wood Stain has been designed to deeply penetrate all wooden surfaces. However, you’ll always get best results by giving the wood a light sand first with #100 Sanding Pads. In this article, we’ll dive into the different types of stains and finishes, discuss the best ways to apply them, and cover other essential factors that make your final product stand out. After wiping off the excess Wood Stain, you’ll need to wait for about 10 minutes for the stain to thoroughly dry. Once it’s dry, a second coat can be applied if desired; applied in the same way as the first.

Whether making furniture, installing flooring, or building cabinetry, choosing the right stain and finish can bring out oak wood's natural beauty. The mixture does not contain substances classified as ‘Substances of Very High Concern' (SVHC) = 0.1% published by the European H225 Highly flammable liquid and vapourH319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H412 Harmful to aquatic life with long lasting effects. The Wood Stain instructions below explain thoroughly how to prepare wood, stain wood, and then how to protect wood afterwards. They will help you get the best results when using our Wood Stain. Preparing Wood for StainingPine & Softwoods – Once you have prepared the surface as above you should apply a Pre-Stain Conditioner. This is because softwoods absorb wood stains in an uneven fashion and could come out blotchy once stained. If you don't have a conditioner, you should wipe the wood down with a wet cloth so the wood becomes damp. After the wood dries, sand it smooth using a #100 Fine Sanding Pad - this process helps reduce the uneven absorbtion of stain often found in softwoods.

Light oak woods typically have a honey-coloured hue which can be enhanced and duplicated by using our Natural Oak Wood Stain. The longer you leave the excess on the surface to soak in the deeper/richer the colour will appear. We therefore recommend removing it after only a minute or two and if it dries too light, you can apply another coat. However, if you apply too much and it dries too dark, it is much harder to sand, strip and then re-stain the wood! Used Wood - If the wood is old, it may be painted or varnished. If so, remove any old coatings using a Paint & Varnish Remover first. These coatings will prevent the Wood Stain from soaking into the wood. If the wood has been treated with an oil or wax, wipe the surface down with thinners or mineral spirit to remove this. After removing the old finish, sand smooth with #100 Fine Sanding Pad.

We are open for business!

A. Wood Stain is designed to penetrate into the wood and so the longer you leave it on the more it will soak in and the darker the wood will become. Wood can also only absorb so much stain before it becomes saturated and so any excess would then dry on the surface. This is why we recommend wiping the stain off after one or two minutes. Traditional Oil-Based Stains: Oil-based stains have long been popular for achieving rich, deep colours on oak wood. These stains penetrate deep into the wood, enhancing its natural beauty while providing excellent durability. They are available in various colours, from light tones to dark shades. Further, pre-stain conditioners may be necessary for an even colouration, as oak tends to absorb stain unevenly due to its varying density. Test, Test, Test: It's crucial to test the stain on a scrap piece of oak wood or an inconspicuous project area to ensure you achieve the desired colour. Different types of oak, as well as environmental factors, can impact how the stain appears. Naturally, adjustments may be needed to achieve the perfect colouration. By selecting the right stain, applying it evenly, and choosing a suitable finish, you can enhance the natural beauty of oak and create a visually stunning masterpiece. Apply Evenly: Whether using a brush, cloth, or applicator pad, it's essential to apply the stain evenly, following the grain of the wood. Avoid leaving puddles or uneven patches, resulting in an inconsistent finish.