PetSafe Drinkwell Dog and Cat Water Fountain, Suitable for Large Dog Breeds and Multiple Pet Households, Easy-to-clean Design, Filter Included, 7.5 Litres,Grey

Product Information

If the pump was exposed to low water levels for a prolonged period of time, the pump's motor may have burned out and the pump may need to be replaced. To prevent this, always keep your fountain water above the fill line. If the water is making too much noise, add water to the fill line and reduce the flow using the flow control knob. Encourages hydration - With a 1.5-litre water capacity and a constant water flow, this fountain will keep your cat or dog happy and hydrated Plug in the fountain for short periods of time, until your pets begin to feel comfortable. Try setting it to a lower flow setting.

Lift the impeller (which looks like a small white propeller) out of the motor. There may be a faceplate cover over the impeller than can be pulled up with a coin or fingernail. Wash the impeller in soapy water, removing hair and other gunk that has collected around it.

${o}

Fresh flowing water - Replaceable carbon filter removes bad tastes and odours while the foam filter catches pet hair and debris The fountain is to be used indoors only. The fountain parts and pump are not UL approved for outdoor use. Using the fountain outside can damage the pump. If you have used your fountain outside, the pump may need to be replaced. Pour soapy water inside the motor cavity and clean with a small round brush like the one found in the Fountain Cleaning Kit. A cotton swab or small toothbrush might work too, or anything that can reach all the way inside of the cavity. Compatible filters - Fountain uses PetSafe® Drinkwell® Carbon Filter no. 6 (PAC00-13906); fountain also uses PetSafe® Drinkwell® Foam Filter no. 5 (PAC00-13711) Easy to clean - This lightweight BPA-free plastic pet fountain is specifically designed to be easily cleaned with no hard-to-reach places. The topper can easily be removed to create a quiet, bubbling water flow. A carbon filter and foam filter work together to remove pet hair, debris and bad taste from your best friend's water.

Developed by a veterinarian, the Drinkwell® 360 Stainless Steel Pet Fountain provides your pet with 3.8 litres of fresh, filtered water. Multiple free-falling streams of water entice your pet to drink more and continually aerate the water with healthful oxygen. A charcoal filter removes bad tastes and odours, giving your pet the best way to stay hydrated. The fountain’s multiple streams and circular design allows pets to drink from any angle and is great for multiple pet households. Stainless steel is the #1 material recommended by vets for the most hygienic pet dishes.Please notify PetSafe® brand via phone or in writing of shortages or damage within 24 hours of receiving your shipment. Multiple stream options - A decorative butterfly topper creates 4 free-falling water streams for your furry pal to drink from; the topper can be removed to provide a quiet, bubbling flow Hard water buildup can sometimes cause more noise. Try adding plain white vinegar inside the pump's cavity (without the impeller) and allow it to soak for 10-15 minutes. Allow the impeller to soak in a separate bowl of vinegar for the same duration of time. Clean all fountain parts in soap and water before reassembling the fountain. The Drinkwell® Original Pet Fountain uses an innovative watering system featuring a patented free-falling stream of water and holds 1.5 litres of water. The free-falling stream entices pet's to drink more water because it draws more oxygen into the water and constantly breaks the surface tension, keeping water fresh tasting. For added freshness, the included charcoal filter also helps to remove bad tastes and odours from the water.