TOUPRET FIBACRYL - Exterior Flexible  Filler  1 KG 27038

Product Information

Arroworthy Brush Tote Ciret Fox (The) Monarch Paint Warrior Prodec Purdy Staalmeester Two Fussy Blokes Wooster Oldfields - UK Exclusive Angled Cut Paint Brushes Straight Cut Paint Brushes Brush Bundles & Sets Sash Brushes & Fitch's Value Brush Sets Bristle Paint Brushes Basic Brush Mate Clover Chemicals Coral Eco Union Go! Paint Hamilton Icon Protection Laddermat MPB Olfa

Toupret TX110 isn’t quite as “rapid drying” as the name suggests. In fact, you can be waiting a couple of hours on some deeper holes or if you’re working in cold conditions. That said, it is easy to work with, easy to sand and doesn’t flash through emulsion. I did have a problem once when the moisture from my emulsion made the filler swell, but I think that was down to me applying too much paint in one go. Good product. Sealants & Caulk Ready Mixed Filler Powdered Filler Repair Care Wood Fillers 2 Part Fillers Grab Adhesive Filling Knives & Scrapers To get it flush with wall surface use a sponge or decorating knife to wipe off any excess - best applied in two stages

Our sponsors

Brush Clip & Extension Brush Protection & Storage Cleaning & Preparation Dust Sheets Filling Knives and Scrapers Fixings & Hardware Hand Wipes Knives & Blades Ladder Accessories Paint Guides Toupret joint and skim comes in ready mixed and powder form. There is a full review here, but I have only used the powder form so I can’t comment on the ready mixed sorry. Toupret joint and skim mixes up easily and goes on smoothly. It dries at a reasonable rate, sands down very well and like the rest of the Toupret range, it doesn’t flash/grin through after applying paint. It mixes nicely, sands down well and it’s reasonably priced. Do not apply the filler at temperatures below 5°C or above 35°C or at a relative humidity higher than 80% Toupret produce some great fillers, as well as the odd product that isn’t as good. One of the things Toupret seem to get right is avoiding the issue of flashing. In layman’s terms, this is where you make a repair to, say a wall using filler, then proceed to paint it, only to have the emulsion over the filler dry a different colour to the rest. There can be a couple of causes, but that is a different topic altogether. I've decided to try and see if Toupret Fibacryl would improve things. I have a 310ml tube of the stuff ready, I am just trying to decide how best to apply it.

With a bit of practice, you can make it so smooth that no visitor will realise you have replastered that area! (Only you will see, because you know)

Filters

take a small trowel knife, or even the standard triangular little filling plastic, you don't need to buy a proper trowel, fill over the tape, and go beyond its edges Remain flexible when dry - can be overcoated after 24 to 48 hours depending on temperature and humidity Microfibre Roller Sleeves 2inch - 6.5inch Mini Rollers 7inch - 12inch Roller Sleeves 14inch - 18inch Roller Sleeves Jumbo Mini Rollers Roller Sets Roller Frames Paint Stirrers / Mixers Plastering Tools Surface/Floor Protection Systainers & Cases Tape & Spirit Measure Trays & Kettles Wallpaper Accessories Wet Paint Signs 3M Command 3M Claw I have been a professional painter and decorator for many years and over that time I have used several different types of filler, including some from the Toupret range. Toupret is a French company, however their products have been available in Britain for a while now.