These brands are all recognised as the world’s leading in-line pump manufacturers. What is an in-line pump? Below is a guide to determine what pressure/bar pump you’ll need to boost the water in your home. Once confirmed you can then select which pump range you prefer: The Flowflex In Line Micro Pump is a fully automatic, extra quiet pump for low pressure situations. The SP2B In Line Micro Pump is a compact and powerful hot water pump which can be retro fitted to any shower, tap or hot water system in minutes by any DIY enthusiast to boost water pressure and flow. Selecting the right bar pump for you involves considering the size of your shower head and how many outlets you want to pump to. View our shower pump selector guide below for further information. Shower pump selector guide: For TapBoost to operate, there must be a natural flow rate from the outlet of at least 1.2 litres mer minute (lpm)

Link multiple vessels together to increase performance. Only one vessel should be a pumped model in this scenario. There are a few variations of this product. To be sure which one you need, you can follow this short guide below: Accumulator Tanks can offer even more flow than an inline pump, delivering up to 36 litres per minute. The AccuBoost range of accumulator tanks store water at pressure in the vessel and release this water into the system when there is demand in the property. They are available in a range of different tanks sizes, depending on your requirements, how many outlets you want to run at once and what space you have available in the property. Selected models will fit into a standard kitchen cupboard. The CT Range of shower pumps have a regenerative impeller. They are long-lasting, hardworking, compact, and easy to install.

The Latest Technology

TapBoost is not suitable for boosting multiple outlets. If multuple outlets suffer from poor natural flow, Salamander pumps have a range of products that are suitable that you can find here . They are commonly used as circulator pumps in situations where water flowing through a piping system needs to be pressurised. Applications of a In-Line Pump

Choose TankBoost for a busy home, or when you need to boost water to multiple floors to achieve that enhanced shower performance, even when other outlets are running at the same time. Probably the most common application of this type of pump is in domestic hot-water heating systems. This where small in line pumps, usually using an electrical motor impeller, are installed in sealed closed circuit piping. The advantage of a single stage water pump is that the design keeps a water-tight seal.The Shower Power Booster is the only in line micro pump which is suitable for all systems and applications, it is also the lightest and most flexible pump on the market meaning you can install the pump where ever it is most convenient. Our broad range of hot water booster pumps and other water pump products gives you easy installation so that you will be able to use it instantly to get better outcomes. Our product takes less than 1 hour for installation. Get the easy installation and make your life free from daily difficulties with our hot water booster pump installation in Australia. Save Money Slow water pressure could be caused due to various reasons and affect our overall lifestyle. The common reasons for low water pressure are Gravity, Distance From The Water Source, Low City Water Pressure, Additional Water Systems, Plumbing Problems, and a lot more other reasons. Buying a professional Hot Water Circulating Pump gives you peace of mind from all the water supply problems. What Our Hot Water Booster Pumps Offer You?

CT Bathroom pumps have been designed specifically to meet the demand for increased water supply to the bathroom. With positive head and negative (universal) head models available in 1.8 or 2.6 Choose a pumped model when mains water pressure and/or flow are low – or when you are not sure on your mains water pressure/flow. Choose unpumped only when flow is more than 9 l/min and pressure is 2.0 bar. You need to work out whether you want to pump to the shower only or additional appliances, for example bath taps, the toilet cistern or washing machine. The CT Xtra twin range will pump the shower only, all other ranges are suitable for multiple household appliances. View our shower pump selector guide below for further information. Do you want to boost hot AND cold water or hot OR cold water? Hot AND cold waterAn in-line pump is a type of centrifugal pump that has a vertical pump shaft, with inlet and outlet connections in the same line. These pumps differ from most other pumps in that the fluid enters and exits in the same direction. Single stage pumps only use impellers to drive liquid, as opposed to other more complicated systems using push-pull pistons. Our exceptional range of products offers you better savings on water billing annually. So, get our affordable water pump products and save an efficient cost on your water billing.