Digital gas manometers are used by heating and boiler engineers for a variety of purposes including monitoring gas pressure in piping systems. It is important to ensure a manometer used for gas pressure is ATEX approved as this certification ensures the instrument is suitable for use in potentially hazardous environments. Manometers for Water Pressure mercury is often used over the more readily available and non-toxic water is that the increased density of A manometer is used to measure the pressure of liquids or gases. PCE Instruments (PCE) offers handheld digital manometer products as well as flanged manometer and fixed manometer products for use in a variety of practical pressure measuring applications.

gas and air condition systems at close to atmospheric pressures. A correctly calibrated tester can also Will measurements be taken in multiple locations or just one? In other words, does the manometer need to be portable or stationary? hand. There is a very wide range of different manometers that specialise in testing between different Inclined manometers are typically used to measure liquids and gases where the pressure is very low. The angled design of the inclined manometer makes it particularly well-suited to this role, enabling accurate measurements to be taken. Despite this, digital manometers are often preferred nowadays due to their high levels of accuracy and ease of use. Digital Manometers

Helping you find the right gas pressure test equipment

A manometer allows the measurement of additional liquid/gas sources against atmospheric pressure or against other liquid/gas sources. There are various types which allow you to adjust the pressure on one side to give a more accurate reading. It is also the option to have closed/open ends and the U-tube design which differentiates these two pressure measurement devices. The accuracy of manometers ensures that ships can be made upright after completion of loading. This is an important safety factor for ships loading to maximum sailing draughts, as a ship that is listing after completion of loading will end up exceeding the maximum sailing draught on either to port or starboard side.

The all new Anton APM digital differential manometers are ideal for the heating professional. The APM 135 and 145 feature domestic tightness testing whilst the APM 155 is perfect for commercial strength testing (see table for model specific features). It is a common ‘beginner’s’ mistake to forget to open the valves when monitoring and measuring the list. Closed valves will of course, stop the flow of the water within the hose, which will likely provide a false indication of the list. Hose Simple U-shaped manometers are often no more complicated than this, with an engineer having to calculate

Pressure Gauges

U-tube manometers consist of relatively few parts and are usually one of the cheaper types of manometer, but the trade-off for this is that accuracy can be poor. As a result, a u-tube manometer should not be used to measure particularly small pressure differences and an alternative manometer should be used instead. Lastly, the viewing angle is key when working with u-tube manometers to ensure the reading is as accurate as possible. Micromanometers

Manometers add to the safe working practices of surveyors and seafarers and provide safety for the ship itself. Since so many different types of manometer are available, it is recommended to refer to the operating manual of your manometer to determine instructions for use. Advantages and Disadvantages of Manometers be used to troubleshoot a whole range of different problems from gas leaks to inconsistent pressures. U-tube manometers are one of the simplest varieties available. They are a type of analogue manometer commonly used as differential pressure measurement instruments with flow meters, often used when measuring pressure difference in pitot tubes, nozzles and orifices in airflow and ventilation systems.

A handheld digital manometer commonly is used to measure differential pressure in heating, ventilation and air conditioning (HVAC) systems. Differential pressure references the difference in pressure between two points. For example, an HVAC service professional might compare the difference in pressure in front of and behind an air filter when performing duct system diagnostics. outlet. In response to the difference in pressure, the liquid will travel up the column a distance that can Looking for testing equipment? Our range includes everything from carbon monoxide detectors to water gauges. Knowing which equipment you need is important, and our range includes:

Reports can be wirelessly sent to the popular Anton Sprint Mobile app on iOS or Android platforms, or to an infrared printer to enable engineers to store data and professionally present results their readings to customers (APM 145 and APMMicromanometers are similar to other manometer types, but they are specifically designed to measure very small pressure differences. These instruments are highly sensitive and are well suited to taking accurate, precise readings of the smallest differences. Although they are primarily used for measuring differential pressure, micromanometers can also be used to test or balance systems and calculate velocity or volumetric flow rate. Inclined Manometers