Measuring Tape Clip, Precision Tape Measure Aid Measuring Tool, Fits onto Most Tape Measures (Without Ruler)

Product Information

The above image gives the measurements in centimeters and millimeters at the bottom. Since 1 centimeter equals 10 millimeters, there are 10 divisions between each cm. Each small division corresponds to 1 mm. When examining the provided picture, the first little mark after the 5 cm marking indicates a measurement of 51 mm, which is also known as 5.1 cm. Division Markings in Inches The hook, located at the end of the tape comes in handy when measuring hard surfaces such as tables. You may notice that the hook is loose; this is intentional to ensure accuracy. If the hook has a hole in it, this is so it can grip onto screws. Belt Clip It also helps to roll the tape so that the side you're measuring on is flat against the board. Place the tip of your pencil on the tape at your measurement, then slide it off onto the workpiece for the best results. Burn an inch Here's an easy to read diagram that shows the tape measure fractions. You can see that in comparison, millimeters and the metric system are a lot easier to understand! The bottom of the measuring tape is divided into centimeters. It signifies that the top portion of the tape may display measurements in millimeters, centimeters, and meters.

Every tape measure has a few essential parts, and learning how they work will make it easier to use! The Tape He adds, "For most people, a 25-foot option is great because it’s easy to store and long enough to handle most measuring tasks around the house. But if your space is small, a 16-foot tape measure is sufficient for most projects you’d need it for.” On the top of the measuring tape are measurements such as 1, 2, 3, and so on, which inscribe InchesIf your tape measure is getting old and beat up (like the one below!), the tab at the end of the tape may give you inaccurate measurements. But you can still use it for some applications. With a rubbery outermolding, this tape measure is easy to grip and resistant to damage if dropped, although it might be a bit large for those with small hands. We tested both the 16-foot and 25-foot models and found this tape measure to be very easy to read, with big, bold markings on both sides of the blade. Measurements are indicated down to 1/16ths of an inch, with additional markings to show stud and joist spacings. The entire length of the 1-1/4-inch-wide blade is coated for sturdiness, but the first 6 inches have an additional rip-shield coating to ward off kinks or damage. The standout of the 16-foot version was around 12 feet and the 25-foot model was only slightly longer at around 13 feet in our tests. Still, this tape measure has a lot to recommend it. Most tape measures just have small lines to indicate fractions of an inch, but that can be tough to read. If you need very precise measurements without the bother of squinting at tiny lines, you'll appreciate this tape measure as much as we do. Unlike most other options, this one has a fractional scale—that means it actually has the fractions printed right onto the nylon blade—so you can see clearly indicated 1/8, 1/4, and 1/2-inch numerals, plus small lines to indicate 1/16ths of an inch. Sewing tape measures are flexible tapes that don’t have a case. These are very useful tools for sewing and similar projects but are also handy for taking body measurements, measuring items with curved surfaces, or general measuring tasks around the home. The most common length for a sewing tape measure is 5 feet, but there are some as long as 12 feet.

The tape is the long metal strip you pull out when taking a measurement. It is curved to make it rigid when it's stretched out. The main markings on the tape are the lines. There are all different sizes, and the size of the line corresponds to the size of the measurement it represents. So, the bigger the line, the bigger the section of measurement. When you hook it over an edge for an outside measurement, the tab is pulled out so the measurement can start from the inside edge of the tab that's actually touching the board. What are the marks on a tape measure? The metal tip of a cased tape measure is called the hook or the tang. The hook lets you “catch” the end of the tape measure in place to keep it steady while you extend it. A good hook is large enough to hold in place when required, but not so large that it catches where you don’t want it to. Additionally, hooks with upright points are more likely to catch on items other than what you are measuring.

Suggested Tape Measures from Toolstop

Also, be careful not to let your fingers get close to the edges of the tape as it is retracting. The edges are not super sharp, but enough that they can leave a cut! How to Use the Nail Notch Once all testing was completed, the testers assigned each tape measure a score of 1 to 5 in categories of accuracy, durability, ease of use, performance, and value. These scores were added to the testing results and the numbers were tabulated to choose the top-scoring tape measures. Our testers then evaluated every tape measure for standout, which is the distance the unsupported, extended blade of the tool can remain rigid before bending towards the floor. Each tape measure was extended to its full length while the tester held it at various angles and noted the point at which the tape measure could no longer remain straight. Find the nearest cm marker and count the number of mm marks to its right. For instance, if eight marks follow the 12 cm marker, the measurement is 12.8 cm. The diamonds are spaced 19 3/16" apart, which is the standard spacing for the trusses in a roof. They have their own marking because roofers are working high in the air, and being able to see the spacing they need easily makes things faster and safer for them.