Two monitors are always better than one, and the same goes for monitor arms. It’s no surprise, then, that Ergotron’s LX Side-by-Side ranks as our best dual monitor arm. The Ergotron LX Side-by-Side pairs two LX monitor arms together on one mount. The look, feel, and specifications of each arm are close to its standalone sibling. With all that in mind to guide you through, it is easier to proceed with your search for the most effective and best monitor stand for your workspace. The best monitor stands: How we test Grommet mounts insert into the circular cut-outs found on many desks built and sold for corporate offices. A grommet mount is also a form of clamp, but size of the mechanism is different, and the mount attaches the monitor to the interior of the desk instead of an exterior edge. The Huanuo HNDS12, like the HNDS6 (below), is a bit fiddly to set up. It has two clamps that need to be adjusted and roughly a dozen screws that need to be installed. The gas springs also require a bit of adjustment to reduce the force provide, at least when used with a 24-inch or 27-inch monitor.

The sleek, carefully engineered Kontour K1D sure looks the part, and this arm is far from just style over substance. Inside, the forged aluminium arms gas springs enable effortless, perfectly balanced height adjustment which can be easily fine-tuned for different monitor weights. There’s one unusual feature: a USB hub. This includes two USB ports that are placed at the front of the arm base. Each of these will need to plug in to your computer, which might be a problem if you have a laptop with just a few ports, but it’s a functional bonus.From the MX150 Single Monitor Arm to the MX900 Dual Monitor Arm you can be assured that an Invision Technology Monitor Arm is the best Monitor Arm! One of the biggest draws of monitor arm stands is that they are highly adjustable, much more so than the standard freestanding mounts that most monitors come with. Monitor arms can adjust up and down easily, which many monitor stands cannot. Monitor arms can also adjust toward and away from you. The Workstream’s slim budget is felt in its difficult setup and stiff operation. Users will need to install several screws for a clamp or gromet mount. More screws may need to be adjusted once the arm is in place, as its default tension proved inadequate for supporting a 32-inch monitor. Monitor size limits should be respected as well. It might be possible to attach a 40-inch monitor to an arm meant for a 32-inch monitor. The 40-inch monitor may even come within the arm’s weight limit. A larger monitor will distribute weight differently, however, which could cause an arm’s tension mechanism to fail. How we test monitor arms Many monitor arms now have some form of cable management. This can either be in the form of a small clip on the arm itself to hide the cables from view, or more advanced internal systems which completely hide them from view. One of the most appealing benefits of having a monitor arm is how much it cleans up the look of your setup, so we’d highly recommend considering some of the more advanced cable management monitor arms out there. Price

Long warranty: Monitor arm technology isn’t something that will change radically and warrant a replacement every year or two. Instead, you should expect a monitor arm to last many years and adapt to changes such as a new desk or display. It’s furniture. Because of that, we looked at warranty length and customer support to see which companies would stand behind their models and the arms’ expected years of performance while holding up an expensive monitor (or two). Note that monitor arm warranties don’t include damage to the monitor itself. Regardless of the size of your desk, there never seems to be quite enough space to keep it from feeling cluttered. Even with a few office organization tools, it’s tough to keep your desk clear enough to provide a working space next to your computer. Monitor arms change that. All of the mounts we recommend are compatible with VESA standard mounts, so unless you have a non-standard monitor, you should be able to use any of these options. How We Selected This product supports monitors with VESA 75 or 100 mounting systems, and the Vivo offers loads of movement flexibility. Each arm provides 180 degrees of tilt and swivel movement alongside 360-degree rotation. Height adjustments are possible via the Vivo’s central pole, and monitors work in portrait or landscape positions. The more adjustable the arm is, the easier it will be to find the perfect height and angle. Arms that can move vertically are common, but some monitor arms can also articulate more, moving from side to side, rotating, and tilting to suit your seated or standing position. This allows you to personalize your workspace better to your comfort and posture, including minuscule adjustments throughout the day as you sit in various positions. Mounting System

How we picked the best monitor arm

Want a monitor arm that gets the job done and looks good doing it? The Herman Miller Flo is for you. Each monitor arm is almost all metal with only a small piece of plastic to provide cable routing. The arm also has gas springs capable of lifting up to 26 pounds of weight, which is enough to handle 32-inch widescreen and 34-inch ultrawide monitors. The other factor to keep a close eye on is the weight limit of the monitor mount. While most of the mounts on our list have comparable maximum weights, it’s important to make sure your monitor won’t put too much strain on the arm before purchasing it. When it comes to the best dual monitor stand for adjustability we suggest the Varidesk dual monitor arm. This mount has 360 degrees of rotation and pivot and a wide range of height and reach adjustments. Built-in cable management This is not a cheap stand, but it looks and feels fantastic – it’s the perfect addition to a stylish office. Grovemade also produces accessories, like desk pads, stationery trays, laptop risers, and even wireless charging pads, so you can furnish your office with high-quality, matching products.

At Invision Technology we believe in the importance of Health and Well-Being at both Work and Home. We are proud to offer the Invision Technology range of Ergonomically designed Monitor Arms.Good quality monitor arms should be adjustable in multiple ways – 360 degrees tilt movement, height adjustability, viewing angle adjustability, distance setting – these are all the features that an ergonomic monitor arm should provide. They can even help improve the ergonomics and usability of your workspace. If you’ve ever wanted to free yourself from the chains of freestanding monitors, then keep reading. We’ll help you find the best monitor arm for your needs.

Additionally, some of the two monitor models have specific restrictions in regards to how wide the arms can go. This means that certain sizes of monitors, such as ultrawide monitors, might not be compatible with the dual arm models. Be sure to confirm that your monitors will fit on the arms even if they don’t exceed the weight limit. Ideal Ergonomics One of the most appealing benefits of monitor arms is the ergonomic improvement they can offer. If you’re wondering how to best set up your monitor arm, then we suggest using these guidelinesdeveloped by Professor Alan Hedge and Cornell University. The Grovemade unit lifts your screens, which can make them easier to see and create a more ergonomic environment in your office, and it also adds additional space under the monitors. It’s 46 inches wide and can hold up to 100 pounds of weight, and it has a handy aluminum shelf that can hold laptops, documents, or books. It’s easy to set up and use. The monitor’s clamp works similarly to other monitor arms I tested, but it’s more refined and requires fewer screws (a grommet is also available). The VESA mount is also excellent, providing a simple clip design that’s secure and can be easily pre-mounted to a monitor for simple installation. The way this mount works accommodates monitors that have a slightly recessed mount position, which may cause problems for other monitor arms.If you don’t have a stud nearby or want to keep installation simple, find an option with a heavy-duty clamp that attaches to your desk. With this type of monitor arm, make sure the edge of your desk can accommodate a clamp—if your desk has a tapered or rounded edge, you might not be able to find a secure fit with a clamp-style monitor arm. Monitor arms are a great way to reduce the amount of desk space that your computer setup occupies. They also make your monitor look amazing, giving it a floating aesthetic that looks incredible if you’re creating a more minimal, clean-looking setup. The monitor arm has an all-metal construction that in some ways feels sturdier than the Ergotron LX, as the Workstream doesn’t include as much plastic cladding. It’s not entirely a win, though, as the plastic that exists feels frail (and I even broke a small, though unnoticeable, bit while adjusting the monitor). The Vogel’s Dual Monitor Adapter allows you to install two monitors vertically or horizontally. It is compatible with any of the PFD monitor arms for mounting your screens on your desk. The adapter can be used for screens up to 24 inches with a weight of up to 6,5kg per monitor. The Workstream by Monoprice single monitor arm is a no-frills solution that delivers basic monitor arm features at an exceptionally low price.