Open the front panel of your ice machine by unscrewing the (1) top and (1) bottom screw of the Manitowoc front panel with a Phillips-head screwdriver.

If you wish to return your item to Robert Dyas, you can do so by the following method: 1. Request a Collection via Robert Dyas Customer Services Below are some procedures you can follow when resetting different Manitowoc ice machine models; Rebooting NEO Undercounter Machines An ice machine is a crucial kitchen gadget if beverages are the main part of your menu. As such an optimally performing ice machine is key to your success. Keep reading to learn how to maintain and troubleshoot your Manitowoc ice machine for optimal performance all year round. Manitowoc Ice Machine Not Making Ice Please be aware that we currently cannot arrange for delivery of this product to the following postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, BT, PO30-41.

Scottish Highlands & Islands postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, PO30-41

This machine is able to produce up to 12kg of ice per day and 9 ice cubes per cycle with low noise in the meantime. Plus, these ice cubes are bullet shaped to add an exciting twist to your drinks, perfect for parties. This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office. How To Return A Product Please close the front door of the machine, and replace the 2 screws, thoroughly securing the front panel. If you are unable to work another device on the outlet, the ice machine may have blown a fuse or tripped a circuit breaker.On water-cooled models, if the water regulating valve is leaking in harvest mode, it could cause a problem. Replace the valve. Manitowoc Ice Machine Not Getting Cold and Freezing If your specific model ice machine is currently calling for a purge, there should be voltage to the valve. A dump valve is normally closed and will only open when voltage is applied. Manitowoc Ice Machine Not Pumping Water The water pressure is too low – The water pressure into the machine must be 20-80 psi (137.9-551.5 kPA). Safety limits are designed to shut down the machine when issues are present that could damage the unit. One safety limit is designed to shut down the machine if there is a long harvest. And the other is designed to shut down the machine if there is a long freeze cycle.

If the ice is thin at the top of the evaporator, continue reading for the solution further down in this post under the problem “shallow or incomplete cubes.” Manitowoc Ice Machine Keeps Running Allow the water trough to refill until the water flows over the evaporator. This will take approximately 3 minutes. The methods below are for cleaning and sanitizing the S-Series, Indigo Series, and NEO Series of Manitowoc ice machines. Items Needed E05: High-Pressure Control Opened – The high pressure cutout switch (HPCO) has opened three times in a 4-hour period. Create a cleaning solution by mixing the cleaner with warm water by following the recommended ratio in your user’s manual.Never use steel wool or anything abrasive as this will damage the protective coating of stainless steel and allow for the possibility of rust. The water filter is broken – The water filter might be too dirty or damaged. You’ll need to replace it. Dust and clean the outside of the ice machine as necessary with mild soap and water. Wipe with a clean cloth afterwards. Level the ice machine and ensure it sits flat on the floor for optimal performance. Ambient room temperature is too warm Note: If a water pump is struggling it will become very warm and hot to the touch. A water pump that is exceptionally hot is a sign that failure is imminent. Manitowoc Ice Machine Not Dropping Ice

The maximum freeze time is 60 minutes on S-Series and Indigo machines and 45 minutes on NEO® models. The harvest cycle begins automatically after time maximum freeze time ends. The maximum harvest cycle time is 3.5 minutes for a single evaporator and 7 minutes for multiple evaporators. Once the water trough refills and water flows over the evaporator, you can then add the recommended amount of ice machine cleaner. Do not use sharp objects or force ice from the evaporator or any other major components. This could cause significant damage. Please note some larger products are delivered to kerb-side (the street outside your home), it is at the drivers discretion if they can deliver the item to another location on the property. The wrench light signals the harvest season as well as the freezing cycle. This happens in 1-second intervals after three 35-minutes harvest cycles. If it stops working, this could be due to a number of reasons;Clean the area around your Manitowoc ice machine regularly, and clean up any fallen ice or water spills as they occur.