Selections Waterproof Water Feature Cover (1m)

Product Information

When buying custom furniture covers for your patio, you want to be sure it will keep your possessions safe, clean, and dry. But, did you know when you sew, the holes the needle creates in the fabric can leave your cover susceptible to leaks? Big box stores don't tell you their covers can leak at these stitching points in heavy rain. So, at the seams you get drip marks on your furniture. That is why ALCO offers water-resistant stitching sealing which covers the stitching on the inside of the cover so rain and moisture can't get in and damage your furniture. Our Covers Are Water-Resistant While our covers use high-grade vinyl to stop water pools from penetrating it, we cannot guarantee moisture from seeping in through the seams. To completely avoid trapped moisture, it is advisable to choose a cover which has a tight fit and is a few inches shorter than the covered item (for air circulation). Another thing you could do is place an air bag at low points of the cover. By doing that, you will create an incline which will allow water to safely run off Use Vinyl And Not Fabric Covers

If you are trying to choose between the 700d and 13oz vinyl materials, please choose based on your environment. For regular weather conditions, 13 oz. vinyl is a great material at a slightly less expensive price. If you are going to experience heavy weather conditions such as heavy snow, heavy rain, and lots of wind, then please choose the 13 oz. vinyl material. What is the most common material? Use a water treatment to prevent slime, algae, and bacteria growth. Additionally, use a frost treatment in winter to prevent the water from freezing or drain the water feature. Also, if you live in a hard water area use an eco-friendly water cleaner that will stop the chalky residue from forming. Add treatments as needed, generally once a month. FAQs: DIY water feature How do I install a garden water bowl? By following these simple steps your feature will be ready for when the sun makes its next appearance in the spring and your garden can be enjoyed again. If your feature is solar powered (no wires) we suggest removing all the water from the item, giving it a good clean using just warm water a cleaning cloth and maybe a few squirts of Fountain Grime and Lime Cleaner. As soon as the weather begins to change and the temperature gets towards freezing this is the time to make sure your water feature is prepared for the winter.For a faff-free and easy-to-maintain water feature, Jill Morgan explains how to create a simple solar-powered pebble pool.

Level the bottom of the trench, sump and reservoir using a flat-headed rake, then pour over a 10cm layer of concrete to cover the soil. Flatten the wet concrete with a section of timber cut to the same width as the channel. Widen one end of the trench to create a sump, which will house your submersible pump. Raise the base level at the other end of the trench by around 8cm to form a reservoir. We know that some people are put off by the thought of fiddling for hours to get the feature up and running and so have ensured that whether you choose a mains or solar-powered water feature, installation and maintenance couldn’t be easier. At Primrose, we think of ourselves as the water feature specialists; we have an enormous variety of water features and are constantly adding more to our range to give you the best choice possible. We also supply all the extras you need to get the most out of your feature, including pumps, reservoirs, lights and misters. Once the water feature is empty it can then be covered with a fountain protection cover. These covers come in three sizes ( Small Cover, Medium Cover and Large Cover) and can be placed over the top of the fountain with a simple draw string at the base.Lay decorative cobblestones in the base of the rill on top of the exposed liner, creating a neat edge. A garden water bowl is the simplest of water features. It is a freestanding watertight container that you fill to the brim with water. Water bowls come in different widths, from 60cm diameter up to 180cm, and even larger for custom-made designs. The current trend is for containers that are wide and low, with shallow curved sides. Choose from powder-coated steel bowls that ensure clear reflections. Or, if you love an aged industrial look, opt for Corten steel which rusts over time. After nine months it self-seals with a deep rusty finish. You will not get algae build-up as long as your water bowl remains full to the brim. Rain fall will keep the water feature topped up naturally, but you may need to top it up in the summer. There are wildlife-friendly algae treatments available, such as envil Algae Klear Xtra, or you can use a non-toxic pond dye that acts as a UV filter to stop algae growth. Our covers are made with UV and tear resistant material. We offer three weather specific fabric options to choose from- Cover Max, Cover Fab & Cover Tuff depending on the weather in your area. All our fabrics are durable. We offer a 3-year warranty on Cover Max material and up to a 5-year warranty on Cover Tuff material. We also offer multiple tie down options for an assured breathable yet tight fit. You can choose to add elastic, drawstring, push clips or Velcro straps. Water Fountain Covers with a Touch of Personalisation

By following these simple steps come March 2012 and the start of spring you will be able to enjoy your feature for years to come. Put the solar panel in place, and plug in the cables. Follow the manufacturer’s instructions on how to charge. Turn on the pump. When you are buying a water pump – be it solar or mains powered – there are a couple of factors to consider. First is to note the flow rate, which is measured in LPH, litres per hour. This is the volume of water the pump can push through in 60 minutes. Secondly, note the pump’s head height. This is the pressure the pump can deliver and the height that it can shoot the water. The higher these values, the more powerful the pump. Decide on the position of your pool and place the large plastic reservoir on the cleared ground. Use a spray can to draw around it and remove. Use an edging iron to cut around the outline, working carefully to create a neat edge, then use a spade to dig the rest of the hole to sink the reservoir in. Dig a small trench, running parallel to one side of the main trench, that’s just big enough to house the pipe that will recirculate the water plus the cabling for the pump.We filter our range to offer you only the best quality products – our water features like cascadesand large water featuresare all carefully made to the highest standards and with the best materials. Start by emptying the water out of the feature. With smaller features is quite simple but with some of the larger water features it may involve two people to carefully lift the feature. All the water needs to be removed. A little tip would be to place a towel inside the base of the feature to mop up excess water which struggles to find its way out. Connect the pump to the pipe provided and slot on a fountain head to get the type of spray/water flow you want. Finally, avoid positioning a water bowl under trees because falling leaves can cause water to become stagnant. Skim the water's surface to remove debris if this does occur. Once installed, keep water levels topped up because all submersible pumps require water to run. If the water feature runs dry it may cause irreparable damage.