Though IPA is by far the most efficient option for cleaning prints prior to curing, there are alternatives out there. There are a few reasons you may want to consider an Isopropyl alcohol alternative, namely IPA can command quite a high price per liter, is often subject to availability issues, and can be quite abrasive and harmful if not handled correctly. Remember to rotate it at regular intervals so that the sun reaches all parts of the model. For smaller prints, especially miniatures, you can also place them in a glass of water. The water will refract the UV light across the full surface of the print, speeding up the curing process. Some resin 3D prints curing in the sun. Source: Imgur

Many people have had positive experiences with this resin. The level of detail is comparable to Elegoo’s regular resins, so that’s a good sign. This resin produces smooth surfaces with a bit of a “rubbery” feel. The differences between the formulations of regular and water-washable resins result in different mechanical properties of parts. Because all water-washable resins contain a water-soluble ingredient, printed parts will have a certain level of sensitivity to water. This makes them impractical for use in wet environments. With the print now free of uncured liquid resin, set it aside in your tray or on a fresh piece of paper towel and let it air dry to remove the IPA from its surface. Another option is to buy a wash and cure station like the Anycubic Wash & Cure Plus , Creality UW-02, and Elegoo Mercury X, which largely automate the cleaning process but comes with the price tag to match. You can also consider building a DIY cure station or buying a low-cost UV curing setup. How to Clean and Cure Prints Source: Reddit 1. PreparationI can only blame this on the resin. Becasue right after this one, I cleaned my printed and had impeccable results with the regular Anycubic Grey resin I regularly use. Help from support These are generally used for professional applications like jewelry, watches, and glasses, and are highly effective, with your models completely free of any residual liquid resin after passing through the cleaner. If using one, pay careful attention to what chemicals are supported, especially if there are restrictions on flammable liquids like IPA.

Remove Residue with Ease】 You don’t need to wash your prints with IPA anymore, just rinse it with water and you’re good to go.Curing is fast, measuring 7 seconds for the Phrozen Shuffle resin 3D printer, and an unbelievable 1.5 seconds for the Sonic series printers. Even though the results are not as expected, I can confirm that the Elegoo water washable resin is easy to clean with just regular tap water. If you go ahead and print with it, you’ll notice that the parts are just a tad more brittle than those made with regular resin. Once you print your parts, we recommend taking a toothbrush to brush the residual resin away while the part is in a water bath.