About this deal
With a plastic sheeting barrier, create an entry using ZipWall® zippers; with a ZipFast™ reusable barrier, use the 2.5 foot panel as a door. The ZipWall Dust Barrier Toolkit offers the flexibility to meet practically any dust barrier installation challenge – setting up a plastic dust barrier, setting up a reusable-fabric dust barrier, creating an entry in a plastic barrier, creating a room within a room, covering a door, or sealing a barrier without tape – to name a few. Set up the barrier one pole at a time starting at the wall. Leave the plastic loose at the bottom and make sure the spring at the top of the pole is not compressed all the way. Six 12′ anodised aluminium spring-loaded poles with parts (heads, plates, and Gripdisk™ non-slip pads). Plastic sheeting is not included. Tips for setting up a dust barrier: If tight sealing is required, use FoamRail™ and Span™ tape less seals along the ceiling, walls, and/or floor.
Contents Four 12′ anodized aluminum spring-loaded poles with parts (heads, plates, and GripDisk™ non-slip pads), two standard zippers, and one carry bag. Plastic sheeting is not included.Seal your barrier at the ceiling and floor with a Span™ attached to the top and bottom of a pole. You’ll need two poles, two floor adaptors, and four Spans. It contains everything you need to create a dust barrier up to 16 feet wide and seal it on all four sides. Complete with carry bags, this kit is reusable and works with drop-ceilings. Contains Two 20′ anodised aluminium spring-loaded poles with parts (heads, plates, and GripDisk™ non-slip pads). Plastic sheeting is not included. It contains everything you need to create a dust barrier up to 16 feet wide and seal it on all four sides. Complete with carry bags, this kit is reusable and works with drop-ceilings. Contents:
With plastic sheeting, create an entry using ZipWall® zippers. With reusable panels, use the 2.5 foot panel as a door. If tight sealing is required, use FoamRail™ and Span™ tapeless seals along the ceiling, walls, and/or floor. With plastic sheeting, create an entry using ZipWall® zippers. With reusable panels, use zipper between panels as a door. Seal each wall using one Span™ and a SidePress™. Add a FoamRail™ and SidePress™ if the wall is higher than 8 feet