Here are some prints I made with the LD-002H, with an exposure time of 2sec per layer, and Eryone waterwashable resin. All in all, the Creality LD-002H is an excellent resin 3D printer that offers a decent build volume and lets you produce remarkably detailed outputs in a swift and consistent fashion. Thanks to being equipped with a monochrome LCD matrix, the LD-002H offers prolonged service life alongside low power consumption. This is an affordable and easy-to-use device that will be a perfect choice for both entry-level and more experienced makers. The printer’s parameters make it a perfect device to produce tabletop miniatures, prototypes, art designs, jewels, high-precision models, dental impressions, and much more. Here is my very first print, with an exposure time of 2sec per layer. The rendering is really clean. Upgrade UV Light Source Module: The Creality LD-002H is equipped with a UV integrated light source, providing improved light transmission. The UV light achieves 8000uw/cm². A consistent UV light source is the most important factor in printing. Have you ever encountered this situation: You are in a hurry to print a model, but you failed to print it several times. Unsuccessful printing not only discharges many users but also waste our materials.

The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat. Resins contain additives such as pigments and photoinitiators which settle down while not in use. They need to be shaken or stirred to disperse them probably throughout the liquid.

Design

The following settings have been crowdsourced from community forums, manufacturers, Maker Trainer users etc. The source will often contain important additional information that would not fit on the table. Eg. further parameters, instructions or obervations. LD-002R resin 3d printer, a 2K uses a solid-state display system of 1440*2560 pixels. It avoids tough surfaces and provides you a delicate and smooth texture. You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration.

Thanks to the Creality LD-002H’s improved printing speed, 2K (2560 x 1620 px) resolution, and an XY-axis positioning accuracy of just 0.051 mm, the machine can print dimensionally accurate and well-detailed models with outstanding surface finish. It is equipped with a smart resin vat that features resin level indicators for optimal performance. Lower the lift speed (60mm/min is a good baseline), increase the base (aka initial, bottom, burn-in) exposure, raise the ambient temp to ≈25°C (or as specified), and lightly sand the build plate.

What’s in the Box?

Air Filtration System with Activated Carbon: Activated carbon can effectively reduce the emission of the odor from resin and is more environmental-friendly. Definitely a must-have feature for each and every resin 3D printer out there, the LD-002H has been integrated with a high-quality air filtration system with activated carbon that contributes to keeping obnoxious odors of exposed resin at bay. Even though the system eliminates most of the fumes, we strongly recommend you to use the machine in thoroughly ventilated premises. The air filtration system is located at the rear side of the build chamber. Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems. For a full guide, you can read MSLA 3D printer slicer settings, but the ones on the spreadsheet are: Does this is really a great change? With this new printer, you no longer need to buy various kinds of toys for your children. You may even start your own business using the model featuring wide choices, easier operation, and higher efficiency.

Here comes the good news. The new print LD-002H adopts an upgraded UV Light Source Module and an upgraded transmission system. Compared to the LD-002R resin 3d printer, it greatly improved the stability of the light source and the success rate of printing. If the recommended settings gave you a good starting point for printing, press the plus button next to them. This helps the next person know what to expect. (You need to be logged in to vote.) Although they are similar in appearance, the LD-002H resin 3d printer adopted more professional and advanced technology, making it a great product for business start-ups. You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom. This LD-002H is still equipped with a charcoal filter to reduce the diffusion of resin odours, a graduated VAT, a maintenance hatch on the side for easier screen replacement, and the power button on the front.The year 2020 has witnessed the birth of a new member of Creality, Creality LD-002H Resin 3D Printer, an upgraded version of the Creality LD-002R 3d printer. You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes. Easy Leveling System: Simply lower the printing platform atop an ordinary piece of paper. Then hand tighten the leveling nut to complete the leaving process.

It takes 6 to 18 seconds for the Creality LD-002R 3d printer to print each layer. So if your son is waiting eagerly to have a new toy, or you want to produce more products for your company, the LD-002H resin 3d printer is a good choice. For the second print, I will create my own file, using the Chitubox software, which already offers a default profile for the Creality LD-002H, you will need version 1.6.5. Creality offers two MSLA resin 3D printers in the LD-002X family; the LD-002R, the subject of this review, and the LD-002H. The primary difference between the two is the LCD used for masking; the LD-002R uses a 5.5” RGB LCD screen which requires a longer exposure time while the LD-002H uses a 6.08” inch Mono LCD which can make layers at almost four times the speed. Mono LCD screens allow more of the UV exposure to reach the vat, which greatly reduces the amount of time required to cure each layer. The Creality LD-002H is a neatly-looking desktop 3D printer with a rather small footprint and a refined, futuristic appearance. Its outer dimensions of 221 x 221 x 403 mm (8.7 x 8.7 x 15.8 inches) and weight of just 6.5 kg (14 lbs) make it a perfect fit for any table, while its authentic appearance completes the scenery and makes it a fine addition to a home workshop or office.

Související produkty

Besides, it features an upgraded UV light source module and improved transmission system for superior light permeability, which greatly reduces the printing time and provides a more uniform light exposure of 8000uW/cm², increasing the printer’s performance while providing you with a smooth and reliable resin 3D printing experience. As stated before, the parameters above are not a replacement for resin validation, they are merely a good starting point for it.