This is step 1 - you will need to access the settings of whatever device you are trying to change: USB modem, MiFi, phone used in tethering, your WiFi router, etc. Plugging one unit into the same network via more than one means (LAN and WIFi)? Always going to be a problem. But anything less than 255 in that position means more than one number is used, and if its a "0" it means all 256 numbers are used.

The WiFi client interface shows the selected WiFi network SSID, RSSI signal strength bars and the uplink bandwidth (in Kbps) currently being used. Solo can be connected to any camera with both SDI or HDMI options allowing you live stream video in full HD, going beyond cellphone quality. Bonding These are just two examples, if some of the digits in your exact setup differ, it is still a conflict! ConflictsAnd, because you have 256 values to choose from, its pretty easy to choose values that are not likely to conflict with other WiFi, MiFis or your phone. Just avoid relatively low numbers (1 and 8 and 10, for example) and instead use some medium range values (12, 22, 32, whatever you want) and your chances that some other device in the wild has used that same number is very low. While each device is a little different, here are general steps that are applicable to all devices to help guide you. Get To The Settings For Your Device Select Enable and press the Center ( OK) button to enable the interface. The Enable button of the interface changes to Disable, indicating that the interface is currently enabled. However, almost all modern (sold in the last 3 years) modems now use another technique to provide bandwidth to a host device - virtual ethernet ports. Why? the answer is pretty straightforward: this makes host OS support much more general, and alleviates the need for specialized drivers on the host OS. Especially for modems sold to consumers, its easy to see why this method of acting like a virtual ethernet port is beneficial to these devices.

The next screen you see is split into two (2) sections, One-Touch Streaming and Streaming Destinations. The difference between the two categories are the steps you use to configure that destination.

Detecting IP Conflict

Connect two cellular modems with Wi-Fi and LAN and we will bond them together to create a single fat connection for all your needs. OVP/CDN Integration Any number from 11 to 255 will do. Avoiding the "common" ones of 1, 8, and 10 will help avoid future conflicts with WiFi networks or LAN networks. Save the Settings and Reboot the Device and Solo Combining up to 6 internet connections: 4 external USB modems (5G & 4G), WiFi & Ethernet over LiveU’s industry’s proven LRT™ cellular bonding protocol.

hours of untethered streaming. Broadcast time can be extended by 4-6 hours per Power X1 External Battery . Now, change the third number to something other than 1, 8 or 10, and change it something other than what you used for any other device or modem you also changed. Her are some example conflicts, with each line in the example below suppose to represent 1 of 2 modems or other connections: 192.168.8.100 If you have any doubt or unsure, please open a support case and the support team can help identify for sure if the issue is IP conflict. About Subnets and IP Routing

Promoted articles

You frequently get the Communication Error message on your unit - particularly only when using it with modems (vs on only LAN or WiFi) This is the most common example. You plug in two Huawei modems (or Alcatel, or others - just using Huawei as the example), both are the style of modem that acts a virtual ethernet port, both are in their "default" settings.

You can enable or disable one (or even all) of the LiveU Solo interfaces. Each interface must be enabled/disabled separately. The examples below describe how to enable/disable cellular modem interfaces. These procedures are the same for all interface types (cellular modems, WiFi and LAN interfaces).

Conflicts

For example: Got two brand new modems that are the same make and model each? they will very likely need to be changed to not conflict. Many, many home routers start with this space for your home network. It is probably the most common for that situation. The Interfaces option in the Main screen indicates the number of active interfaces out of the total number of interfaces on the LiveU Solo. In the example to the left, 4/4 means that there are four active interfaces out of the four total interfaces on the unit (2 x cellular, 1 x WiFi and 1 x Ethernet network interface).