Consistency may or may not be satisfactory, depending on what you’re painting. High viscosity paint is great to work with on wrought iron or small surfaces because it doesn’t drip.

If the product is compatible with a sprayer system, the best way to paint outdoor metal is with a sprayer. This power tool minimises work and will deliver a smooth and even result. Bare surfaces should be sealed with a metal primer or anti-corrosive sealer. The same treatment may be required on surfaces which are in poor condition. Compatible with a wide range of materials, including masonry, plaster, ceramic, and plastic, the product produces its best results on bare wood or ferrous metals. Outdoor metal objects and surfaces, including galvanised doors and aluminium railing and sides, have to be protected against rust and elements with a suitable outdoor metal paint. An array of latex and oil-based paints are suitable for the purpose, but oil-based products generally perform better against adverse weather and elements.

Stylish and equally classy is copper. Enhancing a luxurious yard or a romantic English garden, this hue mixes well with evergreen vegetation, looking at its best on wrought or cast iron and galvanised steel.

This is specific for ferrous and non-ferrous metals, insulating the surface from rain and humidity from outside and inside. Its three-in-one formula allows applying the paint onto rusty metal without using a primer or undercoat. In fact, this product acts as a primer, undercoat and topcoat on its own. This feature reduces redecoration time and costs. Traditional colours include white and blue. White is a beautiful choice in both urban and rural environments; it has a unique elegance and pairs with all other colours. Blue is ideal to use in a coastal area, inspiring freshness. Full hardness is achieved in one week, and it’s recommended to handle painted items with care during this time. Results might not be satisfactory if the product is applied in damp conditions or temperatures below 10°C. Thinner paints can be applied with a roller on solid surfaces like garage doors or gutters. On wrought or cast iron, the best results are achieved with a paintbrush or sprayer. The only downside of this method is waste. A sprayer takes up a lot of paint, so make sure to account for this when choosing the quantity. Apart from this, the process is straightforward. Fill the reservoir with paint, put on protective equipment and spray paint the objects from 10-15cm of distance.

Similar products

Particular caution should be taken when using the product indoors. Volatile organic compounds in the paint can cause irritation or allergies when handled in poorly ventilated spaces. Limit indoor application, use a protective mask and keep windows open during the application process. Providing years of protection, Rust-Oleum Gloss covers up to 9m²/litre depending on application method and rate, and porosity of the surface. Ideal for outdoor and indoor use on a variety of materials, the product touch dries in two hours and can be recoated after 16 hours. Preparing the surface is key to achieving satisfactory results. For a good paint grip, the surface has to be cleaned and degreased. Remove all stains, old flaking paint, grease, oil, and rust from the surface. This is important even when the product claims to do the job when painted onto rust. Apply the primer following the manufacturer’s instructions and cure the surface for at least 24 hours before applying the paint.