Although markings are not provided on the jig, it offers a 37mm offset from one side and a 50mm offset from the other side. Meanwhile, the spacing between two consecutive holes is 25.4 mm or 1 inch which is good enough. In fact, the size of each hole is 1/4 inches, so you won’t find any difficulty using any kind of hinges.

The design of this shelf pin jig is quite unique as compared to other options as you can freely move the template and make holes at your convenience. Moreover, it even offers 37mm and 50mm offset choices so you can freely work on any size of cabinets or shelves. Next up, if you are looking for an affordable shelf pin jig out there, Milescraft is quite a good brand to consider as it’s pretty famous for offering budget-friendly tools. The Woodhaven 781 Shelf Pin Jig is one of the simplest-looking shelf pin jigs that you will find in the entire market. Since it has an array of 15 holes, you can even use it for drilling holes in larger cabinets and shelves. Speaking of this shelf pin jig here, it comes with an array of 15 holes, where all the holes are spaced by a distance of 25.4 mm and have a diameter of 1/4 inches. However, since there are two rows given on the template, the offset distance for the rows is 37mm and 64 mm respectively.Choose a drill bit that is the same diameter as the shelf pin: Make sure the drill bit is the same size as the pins. If your shelf pins are ¼", choose a ¼" drill bit. If it's metric, use a metric bit (not an imperial size bit that's "close enough.") The shelf pin measured below is just shy of ¼", so I'll use a ¼" bit for that hole.

Align the jig with the front edge of the cabinet side where you want to drill the holes. There's a removable hook piece on the jig that makes it easy to keep the correct spacing from the front edge. Use the pegboard's pre-existing holes as a guide to drill the shelf pin holes. Remember to keep the bit as straight as possible, and stop as soon as the flag brushes against the pegboard. Repeat for the other side You typically don't need shelf pin holes all the way down the side of your cabinet sides, unless you plan on storing paper or other flat items. In general, you'll want at least six inches to get your hand in there comfortably. The first step is to cut a piece of pegboard that matches the height of your cabinet side. You can also make it the same depth as the cabinet so you can do all the holes on a side at the same time!

In our opinion, the KREG Shelf Pin Jig is the best option if you are looking for something reliable and compact. It offers a hole spacing of 32 mm and can be easily converted into a larger template by using a similar jig. Moreover, it has a brilliant build quality and comes with a 1 year warranty as well. Looking at this shelf pin jig, it’s almost 6mm long, which is quite compact, hence, easy to store and handle. However, it also comes with an attachment that allows you to join two similar templates for larger projects. As you might already know, each shelf pin jig template is designed to help woodworkers to make holes with proper spacing. However, the spacing between the holes is not the same usually in all the templates when you start comparing the options. While some templates come with 32 mm hole spacing, which is the standard size. But, in some projects, you would require making holes with smaller spacing. That said, shelf pin jigs with 25.4 mm or 1-inch hole spacing are also available in the market which you can consider buying. 4. Offset Distance