Next, grab your pull-through tool and carefully pass it through the barrel from the muzzle end. If your air rifle has a moderator, be sure to align the cable correctly. Pro tip: using a drink straw can make this step even easier! Or simply remove the moderator. Feed the pull-through carefully down the barrel, taking care not to scratch the lands: even though brass is softer than steel, it can still do some damage if it’s not used correctly

Gun Cleaning Kits | Gun Maintenance Accessories | Airgun Depot Gun Cleaning Kits | Gun Maintenance Accessories | Airgun Depot

From a recognised air-rifle kit brand like Napier of London, you can be sure of only the highest quality. Includes: Carry kit A: How often you should clean your air rifle will depend on how often you use it. If you never use it, you won’t have any real need to clean it (provided that it’s stored correctly). A well-made air rifle won’t need to be cleaned each time it’s used, and if anything, cleaning too often can actually risk damaging the barrel. All of that is to say that you only need to clean your air rifle if you notice a decline in accuracy, or if you want to experiment with a new kind of pellet. Even then, many people recommend never cleaning an air rifle at all. Q: What kind of cleaning kit do I need for my air rifle? When using any type of bore-cleaning or conditioning product, less is more – and that’s especially so with abrasives like bore paste The ideal barrel cleaning kit: Napier’s Airgun Pull Through Kit contains everything you need to effectively clean any type of air rifle, and is suitable for .22 and .177 calibres.A: The kind of cleaning kit you’ll need for your air rifle will depend on the calibre of your airgun. Most air rifles are .177 or .22 calibre, so you’ll need a kit that includes a bore brush for those sizes, as well as suitable oil and cleaning pellets. You may also want to get a pull-through cleaner, which can be helpful in getting all the dirt and grime out of your barrel. Q: How do I clean my air rifle barrel? Right: Take hold of the pull-through and pull the patches through the bore, taking care to keep everything central and away from the crown This Napier pull-through is easy to coil up for storage and transportation – the loop may look fragile, but is actually pretty tough

How to clean your airgun - Airgun Magazine How to clean your airgun - Airgun Magazine

With the Napier Pull through tool and easy-to-follow instructions, you'll have everything you need to get your air rifle clean and functioning at its best. Plus, the kit comes with a convenient component case, making it easy to store and transport. Perfect Choice for Airgun Enthusiasts Looking for the perfect cleaning kit for your air rifle? Look no further than Napier's Airgun Pull Through Kit! Our kit contains everything you need to effectively clean any type of air rifle, making it suitable for both .22 and .177 calibres. Easy-to-Use Design The BoreSnake, developed by US firm Hoppe’s, is similar to the traditional pull-through, but instead of using disposable patches, it’s the body of the snake itself that carries out the cleaning. Use just the right amount of compound or solvent – you don’t want it seeping into internal areas such as the transfer portAs mentioned above, I’m not a fan of using cleaning rods with airguns, but bore paste can be applied using a pull-through. It won’t be as thorough, but you can repeat the process as many times as you like until you’re happy with the result. As the pellets are fired down the bore, they will gently scrub away at the exposed lead in the rifling, with the non-lubed pellets drying out the bore ready for the next proper shot. You can tell how dirty the barrel has become by looking at the accumulated lead that’s been removed from the lands and grooves of the barrel US firm KG Industries makes some fairly high-tech gun care products, one of which is KG2 Bore Polish. Of all the bore pastes I’ve ever used, this is probably the most gentle, lending itself to repeat applications. And last but not least, don't forget to give the outer surfaces a good clean and polish with one of the field patches supplied in your Napier power pull-through kit.

Airgun Cleaning Kit Napier Pull Through - A. Branthwaite Airgun Cleaning Kit Napier Pull Through - A. Branthwaite

Many shooters will tell you that they never clean the barrels of their airguns – and that goes for a lot of rimfire shooters too. As a lead projectile is fired down the bore, be it a pellet, slug or bullet, it will deposit a thin layer of lead over the lands and grooves of the rifling. A: No, you should not use WD-40 to clean your air rifle. While WD-40 is great for cleaning other things, it’s not designed for cleaning firearms and can actually damage the seals on your air rifle. Q: How do I clean my air rifle scope? But the point of this process isn’t to enhance a barrel that’s already shooting well, it’s to try to rescue one that’s not shooting properly when all other methods have failed, and in cases like this it might just be worth giving bore paste a go. If you need a catch-all cleaning solution for your air rifles then this is it. The pull-through will work with PCPs, springers and gas-rams, and the pull-through won’t care if your gun has a fixed barrel or is a break-barrel.

Some guns, like the Zbroia Kozak, feature a shroud that does not offer direct access to the barrel itself. Most shrouds extend beyond the actual length of the barrel. Trying to feed the pull-through down the shroud and in through the muzzle will usually result in the loop that holds the cleaning patches just folding up on itself. Repeatedly plugging away, hoping the pull-through will eventually find the bore, isn’t a great idea either. Many pull-throughs feature a coated brass shank, which shouldn’t be stabbed against the crown as it could potentially do some damage. Instead, use a drinking straw to present the pull-through centrally to the bore. Just make sure the straw is long enough so it doesn’t slide inside the shroud, never to be heard of again. Don’t ask how I know this.

Napier Power Pull Through Kit – Redbeck Shooting Supplies

Gun Cradle: Some way to hold the rifle steady is a must. This particular Gunsmith’s Maintenance Centre from MTM is about 13 years old and is still going strong. Many people will get through their entire shooting career without using bore paste, while for others it’s become an indispensable tool. Bore paste contains abrasive particles, and its main role is to condition the bore of Scroll down to watch the video below for detailed instruction on how to use the Power pull through kit. Complete Air Gun Cleaning Kit The easiest way to insert a pull-through is directly into the barrel – this BSA Ultra XL makes the job easy A: The best way to clean your air rifle pellets is with warm, soapy water. This will get rid of any dust and debris. When dried, they should be lubricated with oil to prevent oxidation. Cleaning air rifle pellets may improve accuracy and prevent fouling. Q: Can I use WD-40 to clean my air rifle?Gunsmithing Service – We would be happy to give an estimate on any gunsmithing requirements. Tailored gun fitting sessions are also available.