KitchenCraft Flexible Bowl Scraper Tool, Plastic, 17 x 10 cm,White

Product Information

Using a diamond honing card here’s a link to the one I use, hone flush across the top edge of the scraper for a few seconds. An angle around 65 to 60-degrees works for me, however, you might find a different angle works better for you. To be honest, it was very frustrating watching him perform this technique effortlessly time after time when I could not make it work at first. This new edge will require grinding more material on either the top or bottom edge of the bevel. Transfer the new angle to the grinding wheel platform. Presenting a scraper angle, this extreme into turning wood fibers will not do much besides scratch the surface. Within only a few moments, the skinny tip would be dull and curl under. Ideal Scraper Bevel Angle

Scraper sharpening, of all the woodturning tools, is probably the easiest tool to sharpen. But there are a few details to be aware of during the sharpening process. These are simple white scrapers that are flexible and are made to be comfortable and easy to handle. They were made to be professional quality and this brand has actually been in operation with this specific design since 1905. If you want to add a pop of color to your kitchen and have an indispensable dough making tool, the Fox Run 6060 Dough/Bowl Scraper might just be for you. With the extra burr added to the scraper edge applied with the burnishing tool, raise the tool rest a bit and angle the scraper downward. Because they don’t have a handle, plastic dough scrapers are less easy grip than metal versions, and greasy fingers can slip more easily.Our ultimate goal is to ease that abrupt force of the round nose scraper and make it act more like the cutting action of a bowl gouge. Once the sharpening platform is set to the desired angle and the top surface of the scraper has been honed smooth, it’s time to sharpen. When the sharp edge of the round bowl gouge fades, you do not need to return to the grinder, unless the edge is in desperate need of sharpening.

The reason most woodturners become consumed by their hobby is that itprovides an outlet for their creativity and a place to hone their skill.Turning a rough piece of wood into an object of beauty or function is, for most turners, a source of tremendous personal satisfaction. We really don’t want to depend on the blunt force of that chunk of raw metal against our wood turned piece.These are your typical rubber spatulas. They have sturdy handles with orange silicone ends. The ends are flexible so you can easily use these for bowl scraping. You can also mix, stir, scrape, scoop, and sere with these so you have some additional flexibility. Because the burr was applied to the round nose scraper by hand, it can vary in consistency. You may connect, and make a cut in one area of the nose better than other areas.