The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. A strong joint that will resist the elements and stand the test of time - better than traditional jointing methods. Technically advanced: Years of research and continuous development of our jointing compound makes this a market leader. We sell tens of thousands of EASYJoint tubs every month throughout the UK and in Europe.

Use a squeegee or soft bristle push broom to move the jointing compound around the surface and water to move the compound to the bottom of the paver joint. Truly an all weather jointing compound: An all year round hard landscaping product to point your paving that can be used whatever the weather conditions are before, during or after applicationIn these applications you are installing a clean stone that has no fines in it. This allows water to permeate through the base material and out of the system whether into the subgrade or through perforated drainage pipes. This free-draining material along with the semi-permeable EASYJoint creates a system that does not hold onto water reducing freeze-thaw cycles. • Synthetic Base Projects EASYJoint is the UK's top-selling paving jointing compound, favoured by professionals and DIY installers all around the world. This product was first developed in 2009 and has now evolved to meet user demands and keep up with the latest trends in the industry. The EASYJoint family now has 9 products within the range.

Very fast to use: The use of water to wash and fill the joints between the paving is a breakthrough in jointing methodology. It assists the paving grout to compact into the joints so there is no need to 'strike' or 'tool' the joints unless you want a smooth finish. No Waste: Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2" (50mm) or more of water. – There is no waste with our jointing compound, EASYJoint is an environmentally friendly product.

Rinse any remaining jointing compound off of the surface of the pavement and any oil residue. You do not want to leave any remaining residue on the surface otherwise it will stain. Smooth the joints:when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool Less Effort: The wash and sweep in application method makes it easy to use and jointing paving is faster than traditional methods Available in different colours, EasyJoint holds up well against weathering and is incredibly long-lasting on joints that are 3mm wide and over. Once opened, the remaining product can still be used, in turn reducing waste and making the most of your money. The original jointing compound for all weather paving. It can be used rain or shine, at any time with an oustanding finish.

Similar to the above systems, paver base panels have drainage holes in them and when installed with High Performance Bedding below, this system allows water to flow through it and into the subgrade following a slope out of the system. • Early or Late in the Season

Easyjoint can be used in wet or dry conditions and is sold in a 12.5kg tub which will cover an average of 7m² depending on slab size and joint width. I found that the shower or vertical setting on the hose nozzle works well with the installation of this product. When finishing the joints, a jointing tool may smooth out the surface of the joints to give a more pleasant look to the finish. The product should sit 1/8″ below the surface of the paver or bottom of the chamfer, whatever is lower.