RONSEAL Ultimate Protection Decking Oil Natural Oak 5L

Product Information

Fatty Acid Cobalt Salt. Hydrocarbons, C10-C13, nalkanes, isoalkanes, cyclics, 2% aromatics. 1,2-Benzisothiazolone. reaction mass of: 5-chloro2-methyl-4-isothiazolin3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol3-one [EC no. 220-239-6] (3:1). Bangkirai: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone. Colours: The colour swatches are an indication only and representative of the product applied to clean new/pale timber. The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.

Ipe: 6-8 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone. Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain.When buying partner items like this one, your contract of sale will be with our Range Plus Partner instead of us. Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Balau: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone.

Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description.Many wood species contain water-soluble coloured extractives ( eg Larch ) which may leach out naturally when weathered. Weathered, bare wood surfaces can be refreshed with Osmo Wood Reviver Power-gel. P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions. Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish (remove and sand down as required). The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour. A range of interior and exterior wood oils suitable for any project and wood type. Includes traditional wood oils, Hardwax oils, wood oils with UV filters and more.

If it doesn't bead, you'll be ready to put on the oil. If it does then you'll have to clean it again until the water stops beading. Contains Fatty acids, C6-19-branched, cobalt(2+) salts, 1,2-benzisothiazol-3(2H)one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2Hisothiazol-3-one (3:1). May produce an allergic reaction.

Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. By working with a variety of trusted Range Plus Partners, we’re able to offer our customers a wider selection of products.