The VGA-Vertical Bottom Mode gives only 20mm clearance and does not allow for fan or radiator installation. With any motherboard it does not allow fan or radiator support in the bottom. This is an estimated performance guide, results will vary depending on the intensity of the game. This is not an accurate expectation across all games! The second side panel is closed with an aluminum mesh panel. The two mesh strips sit directly above the PSU and HDD slots, as well as directly above the fan mount on the partition between the two chambers. In the event that fans are installed there, they will get enough air. The 5 Slot Mode is ideal for ITX and M-ATX motherboards and allows up to 280mm radiators to be installed at the top. If using a M-ATX motherboard, the bottom radiator can only be 240mm, but with ITX you can install up to a 280mm radiator. Please note that whilst we endeavour to provide information as accurately as possible, there are times when components may be cosmetically different than shown due to new revisions of hardware.

Credit is provided by Novuna Personal Finance, a trading style of Mitsubishi HC Capital (UK) PLC, authorised and regulated by the Financial Conduct Authority. Financial Services Register no. 704348. The register can be accessed through http://www.fca.org.ukOnce inside, you’ll spot room for up to an ATX motherboard in the main compartment, along with room for radiators and fans along the top, front, bottom and side. Two 140mm PWM fans come installed at the front intake, while the rear exhaust carries a single 120mm PWM spinner. The case only has one filter, at the bottom, and it keeps the same, not-so-pretty plastic handle as the O11D Mini. This is visible on the side, and although practical, a little unsightly. Technical support is provided with no time-frame limitations - should you have an issue with your machine at any point, please ensure that you make us your first port of call for guidance. The O11 AIR MINI is ideal for air cooling builds, as it has enough clearance for up to 170mm for larger tower coolers.

The O11 AIR MINI also accommodates AIO watercooling with enough installation space for 240mm or 280mm radiators on the top, side and bottom. Constructed of steel instead of aluminium, the O11 Air Mini no longer retains the initial focus on ITX builds, evident in the case's larger footprint. The undesirable feature of the unattractive bottom air filter is unfortunately still here. Despite these changes, the case has kept its cost reasonable, while its size remains relatively compact for an ATX case. A sophisticated profile is crafted through the steel mesh panel at the front, a change from the lively look of the Lian Li O11D Dynamic Mini’s glass side and front panel. However, the see-through side panel and the aluminium trim accent at the front remain. Configuration OptionsGreat case, enabling a very powerful system to be installed in a form factor that doesn't take over your desk. Fan mounts: 2x 120mm/140mm front, 3x 120/2x 140mm roof, 1x 120mm rear, 2x 120mm side, 2x 120mm/140mm floor. Small tower with big airflow, the O11 AIR MINI provides modular design for ATX, M-ATX or ITX motherboards. Being all about the air, O11 AIR MINI has a spacious interior to accommodate multiple confirgurations of fan and radiator setups to maximize the airflow. Furthermore, you can install a standard ATX mainboard in the main chamber and place a tower cooler with a height of up to 170 mm on it. Furthermore, you can install graphics cards that have a maximum length of 362 millimeters. The numbers definitely impressed us. To test the functionality of the case, we installed some hardware components. We used the following components for this purpose:

Additionally, This is also where the PSU and storage are concealed. The main chamber will display your best components and this case makes cable management a breeze.You will have noted the floor of the case is completely empty and could easily accommodate a second radiator so our key message is that Lian Li and Der8auer have come up with a clever design that gives you plenty of options. The bottom of the case even has a removable dust filter for easy cleaning. There is plenty of room for enthusiast-grade hardware in both air and AIO cooling setups. There are even several different configurations depending on your preferences. This versatility allows for up to 280mm radiators, large GPUs, tall CPU coolers and ATX motherboards. Microsoft for Business CouponExclusive: 20% off select Surface Pro 9 for Business + Type Cover Bundle The mesh design on the front, top and side panels of the O11 AIR MINI have been optimized to allow maximum airflow from different sides of the case to the temperatures stable and low. The super fine mesh also acts as dust filter to avoid dust buildup inside the case.