Be Quiet Pure Base 500DX Black, Mid Tower ATX case, ARGB, 3 pre-installed Pure Wings 2, tempered glass window

Product Information

napos termékvisszaküldés bontatlan csomagolású termékre. Amennyiben sérült vagy más terméket kapott, mint amit megrendelt, akkor segítünk a kereskedővel való ügy lebonyolításában, és megtérítjük az okozott kárt. Rotating to the left we get a crystal clear view into the left side of the case. Opting to forgo window tint, the 500DX’s clear tempered glass provides an unobstructed view of its internals along with a white bezel surround, which continues the look be quiet! was trying to achieve. Finally, securing the left side panel with four thumb screws makes for easy access when needed. Left Side Right

Be Quiet Pure Base 500DX Black, Mid Tower ATX case, ARGB, 3

Throughout testing the CPU cooler fan speed is fixed at 1200RPM, The GPU fans are fixed at 50% duty cycle and all case fans are configured to 1200RPM to maintain consistency. Accordingly, the 500DX performed well here with a CPU dT not much higher than the torture result, averaging 52C dT. It’s cooler than all cases other than the Corsair 220T Airflow and Phanteks P400A RGB, which are tied at 51C dT.The side panel attachment is the same as on many other be quiet! cases, including their top-of-the-line Dark Base Pro 900 rev. 2, and although it makes sense for the Pure Base line, we hope they come up with something more advanced in the future for their high-end cases. It’s the usual fragile metal tabs punched out of the steel of the side panel that slot into holes in the case on one side, and thumbscrews through glass on the other. Both work fine, and be quiet! does a good job of shaping its steel side panels with rails that keep them rigid and slide neatly into place, but there are better ways to do this, like the NZXT H710’s system. All thumbscrews on the case (other than the ones through the glass panel) are captive. All fans intake: 2 x 120mm front, 1 x 120mm top and 1 x 120mm rear all pulling air into the system. Even though there is very little difference in component temperature in the positive, negative and balanced configurations, we would expect an airflow configuration leaning slightly towards positive pressure may be optimal for dust build-up, in a negative configuration dust particles could be drawn into the system through any gaps in the chassis such as the empty PCIe slots or just any other panel gaps. Remek szellőzés és maximális teljesítmény - Minden elemében szellőzésre és teljesítményre optimalizálva nofanneeded said:Your noise high levels are not from the case fans , they are from your GPU and CPU cooling solution.

Pure Base 500 FX Review | TechPowerUp be quiet! Pure Base 500 FX Review | TechPowerUp

Pure Base 500DX White offers various options for installing up to five SSDs in total. Two can be installed for prominent viewing through the window panel. To hide any unwanted cables, the case offers excellent cable routing options. We use Aida64 benchmarking and stress testing tool to apply 100% load to the CPU, FPU, Cache and GPU for 60 minutes with the system in each fan configuration. HWINFO records the data of the CPU ctl/tdie, GPU and system temperature. We then plot the data in a spreadsheet to work out the average temperature throughout each test and present the findings in a chart for comparison. You obviously did not read the review. Skimming doesn’t count. There is official 240/280 rad support on the front intake, as I stated. Just not on top. The Pure Base models are advertised to be “the best combination of silence and flexibility features for a good price”. Based on this review, it is easy to determine that be quiet! has delivered on this statement. With the full front mesh panel and three Pure Wings 2 fans, the 500DX has nailed the proper mixture of adequate airflow while maintaining relative silence.

The be quiet! Pure Base 500DX White is optimized for high cooling performance and designed for those who seek high airflow. To accurately measure the effect various airflow configurations have on system temperature, we devised a simple testing procedure. A prolonged stress test is performed on the system using the various fan configurations set out above to ensure the system reaches its steady-state temperature. konkrét vásárlások és látogatói vélemények alapján a termék forgalmazója rendelkezik-e a Megbízható Bolt emblémák valamelyikével For cooling, it's possible to install up to three 120 mm or two 140 mm fans on the front, two 120 mm or 140 mm fans up top, and a single 120 mm or 140 mm blower on the rear. Radiator support includes up to 280 mm up top and up to 360 mm (or 280 mm for 140 mm fans) on the front. Regardless of what CPU you choose, you'll likely find it hard to run into cooling issues as far as the case is concerned.

be quiet! Black Pure Base 500DX Windowed ARGB PC Gaming Case

That's an easy one: yes. You should definitely consider the be quiet! Pure Base 500DX when browsing for a new PC case. Should you dig the design and respect the brand, the Pure Base 500DX is a solid chassis to build even the more demanding systems that produce high levels of heat. We label any sponsored post as a sponsored post, and the article about choosing a power supply that you reference was labeled as sponsored. Reply Perhaps, or perhaps they are trying to expand into other market segments? They still make quiet cases as well. Most people looking for the quiet cases should be able to look at this and realize it doesn't have any of those qualities, it's minus the insulation and many of the other things many "quiet" BeQuiet cases have. Niche markets are nice, but in general even if you have die hard fanatic customers, they won't support a company. That is what the review says. Unlike most be quiet! cases, this one doesn't dampen noise levels from internal components.Thermals are outstanding, with plenty of airflow via the pre-mounted 140 mm fans. In particular our test system’s CPU cooler was aided by the top mounted exhaust fan, which was very close to the outside edge of the heatsink and seemed to draw air up and out of the case very effectively. Another potential error with fan configuration would be to install all the system fans as intakes, so for this setup, we switched all four 120mm fans to intake making it difficult for warn air to exhaust out of the case. I really don't understand why — in 2020 — be quiet! still uses dated plastic thumb mounts to hold the front panel to the main chassis. There are plenty of magnets throughout the build, and I wonder why a few more weren't thrown in. This wouldn't be an issue if you didn't need to remove the front panel often, but you do. A tápegységborítás tökéletesen elrejti a kábeleket és a tápegységet, továbbá egy dupla merevlemezkeretet is tartalmaz. A rezgéscsillapító távtartókkal rögzített HDD-keret hozzájárul a csendes működéshez. Ez a keret ki is vehető, és így akár 360 mm-es vízhűtés-radiátor is beépíthető előre. A tápegységborítás használatával a tápegység kényelmesen, hátulról építhető be. Editor-in-Chief at PC Perspective. Writer of computer stuff, vintage PC nerd, and full-time dad. Still in search of the perfect smartphone.