Press a button on the remote. You should see a blue-white pulse on the camera screen. This is the IR signal Once you’ve programmed your remote you’ll notice that the light on the top will flash green instead of red when using it for volume and mute control.

Qantec RCQ-100 - QT5505LEDBC Remote Control Repair Qantec RCQ-100 - QT5505LEDBC Remote Control Repair

First, ensure that both your universal remote and your original device remote have batteries installed. Place them on a flat surface facing each other, about 1-3 inches apart. The IR sensors (usually located at the top end of the remotes) should face each other directly. Activating Learning Mode The simplest way to programme your TiVo remote to work with your TV is by searching for the correct code. If there is a strong light source in the room, this could be ‘swamping’ the Infrared signal. Reduce the ambient light After as short period the red led would go off and again no response could be found from the buttons except for a random blip. Removing the batteries and refitting them would also give a "blip" from the IR led.Put your universal remote into learning mode. This can often be done by pressing a specific button labeled ‘Learn’ or ‘Learning Mode’, but the exact method depends on your remote model. Teaching Commands

to Connect a Virgin Remote to a TV (with Pictures) Simple Ways to Connect a Virgin Remote to a TV (with Pictures)

Press and hold down and at the same time, until the light on the top of the remote flashes green twice.Now, point the remote at your TV (or other devices) and test the buttons. If they don’t work as expected, repeat steps 3 and 4 with the next code for your device. Pairing Other Devices While pointing your remote towards the TV, press and hold the ‘Power’ or ‘Channel Up’ button (the specific button may vary by remote model). The remote will start cycling through the available 4-digit codes. Test the Remote Make sure that there is nothing obscuring the transmitter on the top of the remote control, or the infrared sensor on the set-top box.